Bedienungsanleitung Acronis Disk Director 12 (Seite 66 von 80) (Englisch)

624426

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

7.3.6.3 Wiping disk data

Hard disks can contain a substantial amount of confidential information. Often users forget that

private information must be completely destroyed to avoid unauthorized access to it. Simply deleting

an old file is not sufficient.

Windows tools do not guarantee data destruction. Deleted files can be restored easily. Formatting

and even deleting a partition leaves hard disk sector contents the same.

Acronis Disk Editor can be used as a simple and reliable tool for complete wiping hard disk data.

To wipe disk data

1. In Acronis Disk Director, right-click the disk whose data you need to destroy, and then click Edit.

2. In Acronis Disk Editor, press the F2 key to switch to the Hex view mode.

3. Place the cursor at the very beginning of the first sector byte (Absolute sector 0, or 0000 in Hex).

Then, press the Shift+Ctrl+End key combination to select the rest of the disk sectors.

4. Click Fill and enter the 0 (zero) fill value.

5. Click OK and then confirm the operation.

Be careful! After you confirm the operation, all the disk data will be deleted completely and you will not be able

to recover it unless you have backups of this disk made with Acronis disk backup and recovery solutions.

7.3.6.4 Restoring deleted files

Acronis Disk Editor can be used to restore deleted files even after the volume has been formatted or

deleted.

A file can be restored only if:

 it was stored contiguously as a unit on this volume, i.e. the file should not be fragmented.

 it was not overwritten by another data.

Restoring files with Acronis Disk Editor is a bit tricky and requires some hex editor working skills. To

restore a file, you need to obtain some distinctive information about it from the Hex view. This

information will help you to locate the file when searching for it in Hex view.

The following example describes how to restore a couple of .jpeg images files from the formatted

volume.

Prerequisites:

1. The files had been located on the volume My Data (G:) before it was formatted.

2. These images were taken by the certain type of camera.

3. Files were stored as units and they were not overwritten by another data.

To restore files

1. In a file manager that supports Hex, open an existing .jpeg file similar to the deleted file. Our goal

is to find some information that can be used to distinguish these .jpeg files among the other data

stored on the volume.

Lets open a similar .jpeg image that was taken with the same camera in Hex mode with the

Western (Windows) encoding. As we can see in character area, this .jpeg file begins with

something like:

...JFIF....H.H...

and ends with something like:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Disk Director 12 Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Disk Director 12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info