Bedienungsanleitung Acronis True Image 2016 (Seite 116 von 161) (Englisch)

624413

116

Zoom out

Zoom in

Vorherige Seite

1/161

Nächste Seite

 If you use non-optical media, the media must have FAT16 or FAT32 file system.

 Acronis Media Builder supports only x64 WinPE 3.0, WinPE 4.0 and WinPE 5.0. This WinPE

distribution cannot work on x86 hardware.

 A PE image based on WinPE 3.0 requires at least 256MB RAM to work, for WinPE 4.0 and WinPE

5.0 this requirement is 512 MB.

 If Acronis Media Builder does not recognize your USB flash drive, you can try using the procedure

described in an Acronis Knowledge Base article at http://kb.acronis.com/content/1526.

 When booting from the Rescue Media, you cannot perform backups to disks or partitions with

Ext2/Ext3/Ext4, ReiserFS, and Linux SWAP file systems.

 When booting from the rescue media and using a standalone version of Acronis True Image 2016

you cannot recover files and folders encrypted with use of the encryption available in Windows

XP and later operating systems. For more information see File-level security settings for backup

(p. 56). On the other hand, backups encrypted using the Acronis True Image 2016 encryption

feature can be recovered.

11.1.1.1 Creating bootable media

To create bootable media:

1. Plug in a USB flash drive, or insert a blank CD or DVD.

2. Start Acronis True Image 2016.

3. In the Tools section, click Rescue Media Builder.

4. Choose a media type that you want to create. Refer to Acronis Media Builder for details.

5. Select a destination for the media:

 CD

 DVD

 USB flash drive (available only for Acronis bootable rescue media)

If your drive has an unsupported file system, Acronis True Image will suggest formatting it to

FAT file system.

Warning! Formatting permanently erases all data on a disk.

 ISO image file

You will need to specify the .iso file name and the destination folder.

When the .iso file is created, you can burn it onto a CD or DVD. For example, in Windows 7

and later, you can do this using a built-in burning tool. In Windows Explorer, double-click the

created ISO image file, and then click Burn.

 WIM image file (available only for WinPE-based media)

Acronis True Image adds the Acronis plug-in to the .wim file from Windows AIK or Windows

ADK. You will need to specify a name for the new .wim file and the destination folder.

To create a bootable media by using a .wim file, you first need to convert it to an .iso file.

Refer to Creating an .iso file from a .wim file (p. 118) for details.

6. Click Proceed.

11.1.1.2 Bootable media startup parameters

Here, you can set bootable media startup parameters in order to configure rescue media boot

options for better compatibility with different hardware. Several options are available (nousb,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image 2016 Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis True Image 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info