Bedienungsanleitung Acronis true image 9 1 server bundle (Seite 74 von 81) (Englisch)

258699

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

The hard disk with the jumper in master position is treated by the basic input/output

system (BIOS) as bootable.

The jumpers on hard disks that are connected to the same cable can be in the cable

select for master/slave position. In this case, BIOS will deem as «master» the disk

that is connected to the IDE cable closer to the motherboard than the other one.

Unfortunately, hard disk markin

s were never standardized. You mi

ht well find that

markin

s on your hard disk differ from the ones described above. Moreover, for the old

types of hard disks, their purpose could be defined by two jumpers instead of one. You

should study the markings carefully before installing your hard disk in the computer.

It is not enough to physically connect the hard disk to the motherboard and set the

jumpers properly for the hard disk to function — hard disks have to be properly

configured with the motherboard BIOS.

B.2 BIOS

When you turn on your computer, you often see a number of short text messages

before you see the splash screen of your operating system. These messages are

from the POST (power-on self test) program that belongs to BIOS and is executed

by the processor.

BIOS, or the basic input/output system, is a program that resides in the permanent

memory chip (ROM or flash BIOS) on the motherboard of your computer and is its

key element. The version of BIOS that you use «knows» all the peculiarities of all

the components of the motherboard: processor, memory, integrated devices. BIOS

versions are provided by the manufacturers of motherboards.

Main BIOS functions are:

• POST checking of processor, memory and I/O devices

• initial configuring of all software-manageable parts of the motherboard

• initialization of operating system (OS) booting process

Among numerous components of the computer, initial configuration is necessary for

the external memory subsystem that controls hard disk drives, floppy disk drives,

CD-ROM drives, DVDs and other devices.

B.2.1 Setup utility

BIOS has a built-in setup utility for initial computer configuration. To enter it, you

have to press a certain combination of keys (Del, F1, Ctrl+Alt+Esc, Ctrl+Esc, or

some other, depending on your BIOS) during the POST sequence that starts right

after you turn your computer on. Usually the message with the required

combination of keys is displayed during the startup testing. Pressing this

combination takes you to the menu of the setup utility that is included in your BIOS.

The menu can differ in appearance and sets of items and their names, depending

on the BIOS manufacturer. The most widely known BIOS makers for PC

motherboards are Award/Phoenix and AMI. Moreover, while items in the standard

setup menu are mostly the same for various BIOSes, items of the extended setup

heavily depend on computer and BIOS version.

Below we describe the general principles of initial hard disk configuration, and then

configuration (sample) in AwardBIOS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis true image 9 1 server bundle Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis true image 9 1 server bundle

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info