Bedienungsanleitung Acronis True Image 9.1 Enterprise Server (Seite 25 von 115) (Englisch)

624501

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

Using Microsoft System Preparation Tool (Sysprep) does not solve this problem, because

Sysprep permits replacing drivers only for Plug-and-Play devices (sound cards, network

adapters, video cards etc.). As for system Hardware Abstraction Layer (HAL) and mass

storage device drivers, they must be identical on the source and the target computers (see

Microsoft Knowledge Base, articles 302577 and 216915).

Acronis Universal Restore technology provides an efficient solution for hardware-independent

system restoration by replacing the crucial Hardware Abstraction Layer (HAL) and mass

storage device drivers.

Acronis Universal Restore is applicable for:

1. Instant recovery of a failed system on different hardware

2. Hardware-independent cloning and deployment of operating systems

3. Real-to-virtual and virtual-to-real computer migration for system recovery, test and other

purposes.

3.7.2 Acronis Universal Restore general principles

1. Automatic HAL and mass storage drivers selection

Acronis Universal Restore searches the Windows default driver storage folders (in the image

being restored) for HAL and mass storage device drivers and installs drivers that better fit

the target hardware. You can specify a custom driver repository (a folder or folders on a

network drive or CD) which will also be used for drivers search.

The Windows default driver storage folders are determined in the registry key

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current version\DevicePath.

Generally, it is WINDOWS/inf folder.

2. Manual selection of mass storage device driver

If the target hardware has a specific mass storage controller (such as a SCSI, RAID, or Fibre

Channel adapter) for the hard disk, you can install the appropriate driver manually,

bypassing the automatic driver search-and-install procedure.

3. Installing drivers for plug-and-play devices

The primary goal of Acronis Universal Restore is to boot the restored system. The current

version of this product handles only HAL and mass storage device drivers and does not

install drivers for other devices (sound cards, network adapters, video cards etc.). Once the

restored system starts, Windows takes control and initiates the usual first-start process. At

this point, you will be able to specify drivers for other devices if Windows cannot find them

automatically.

3.7.3 Acronis Universal Restore and Microsoft Sysprep

As appears from the above, Acronis Universal Restore is

not

a system preparation tool. You

can apply it to any system image created by Acronis products, including images prepared

with Microsoft System Preparation Tool (Sysprep). The following is an example of using both

tools on the same system.

Acronis Universal Restore does not strip security identifier (SID) and user profile settings in

order to run the system immediately after recovery without re-joining the domain or re-

mapping network user profiles. If you are going to change the above settings on a recovered

system, you can prepare the system with Sysprep, image it and restore, if need be, using

Acronis Universal Restore.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image 9.1 Enterprise Server Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info