Bedienungsanleitung Acronis True Image 9.1 Workstation (Seite 68 von 115) (Englisch)

624460

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

3. If the target hardware has a specific mass storage controller (such as a SCSI, RAID, or

Fibre Channel adapter) for the hard disk, you can install the appropriate driver manually,

bypassing the automatic driver search-and-install procedure.

Use this option only if the automatic search-and-install procedure was unsuccessful.

Acronis Universal Restore uses three sources for drivers:

- the driver repository - a folder or folders on a network drive or CD specified in restore

options. If you have not specified the driver repository in advance, you can do it at next

step.

- the mass storage device driver specified by the user at the current step

- the Windows default driver storage folders (in the image being restored).

The program will find the most suitable drivers of all available drivers and install them into

the restored system. However, the driver defined by the user, will have the priority. It will be

installed, with appropriate warnings, even if the program finds the better driver.

When restoring the system to a virtual machine that uses SCSI hard drive controller, be sure

to specify SCSI drivers for virtual environment in the Specifying Mass Storage Drivers

window. Use drivers bundled with your virtual machine software or download the latest

drivers versions from the software manufacturer website.

4. Click Next.

7.3.12 Setting restore options

1. Select the options for the restoration process (that is, pre/post restoration commands,

restoration process priority etc.). You may Use default options or Set the options

manually. If the latter is the case, the settings will be applied only to the current restore

task. Alternatively, you can edit the default options from the current screen. Then your

settings will be saved as default. See

7.4 Setting restore options

for more information.

2. Click Next.

7.3.13 Restoration summary and executing restoration

1. At the final step, the restoration summary is displayed. Up to this point, you can click

Back to make changes in the created task. If you click Cancel, no changes will be made to

disk(s). Clicking Proceed will launch the task execution.

2. (For Acronis True Image Workstation local or standalone version) The task will appear on

the Active tasks pane of the main window. The task progress will be shown in a special

window.

You can stop the procedure by clicking Cancel. However, it is critical to note that the target

partition will be deleted and its space unallocated – the same result you will get if the

restoration is unsuccessful. To recover the “lost” partition, you will have to restore it from

the image again.

If Acronis Universal Restore finds no HAL or mass storage device drivers compatible with the

new hardware in all available sources, you will be prompted to browse network share drive,

floppy disk or CD to select missing drivers. On starting Windows, it will initialize a common

procedure for installing new hardware. At this point, you will be able to specify drivers for

devices, if Windows cannot find them automatically.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image 9.1 Workstation Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis True Image 9.1 Workstation

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info