Bedienungsanleitung Acronis True Image 9.1 Workstation (Seite 109 von 115) (Englisch)

624460

109

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

/type:[active | primary |

logical]

Sets the restored partition active, primary or logical, if possible (for

example, there cannot be more than four primary partitions on the

disk.) Setting a partition active always sets it primary, while a

partition set primary may stay inactive.

If the type is not specified, the program tries to keep the target

partition type. If the target partition is active, the restored partition

is set active. If the target partition is primary, and there are other

primary partitions on the disk, one of them will be set active, while

the restored partition becomes primary. If no other primary

partitions remain on the disk, the restored partition is set active.

When restoring a partition on unallocated space, the program

extracts the partition type from the image. For the primary

partition, the type will be set as follows:

- if the target disk is the 1st according to BIOS and it has not other

primary partitions, the restored partition will be set active

- if the target disk is the 1st according to BIOS and there are other

primary partitions on it, the restored partition will be set logical

- if the target disk is not the 1st, the restored partition will be set

logical.

/preserve_mbr

When restoring a partition over an existing one, the target partition

is deleted from the disk along with its entry in the target disk MBR.

Then, with the

/preserve_mbr option, the restored partition’s entry

will occupy the upper empty position in the target disk MBR. Thus,

the target disk MBR is preserved. If not specified, the restored

partition’s entry will occupy the same position as in the source disk

MBR saved in the image. If the position is not empty, the existing

entry will be moved to another position.

The following options are available when using the Acronis Universal Restore add-on to Acronis True

Image Workstation. For more information see

3.7 Acronis Universal Restore

/ur_path:[path]

/ur_username:[user]

/ur_password:[pwd]

Specifies using Acronis Universal Restore and the path to the drivers

storage.

/ur_driver:[inf-filename]

Specifies using Acronis Universal Restore and the mass-storage

driver to be installed.

filerestore

/target_folder:[target

folder]

Specifies a folder where folders/files will be restored (a target

folder). If not specified, the original path is re-created from the

archive.

/overwrite:[older | never

| always]

This option allows you to keep useful data changes made since the

backup being restored was done. Choose what to do if the program

finds in the target folder a file with the same name as in the

archive:

older – this will give the priority to the most recent file

modification, whether it be in the archive or on the disk.

never – this will give the file on the hard disk unconditional priority

over the archived file.

always – this will give the archived file unconditional priority over

the file on the hard disk.

If not specified, the files on the disk will

always be replaced with

the archived files.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image 9.1 Workstation Seite 109

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis True Image 9.1 Workstation

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info