Bedienungsanleitung Acronis True Image Echo Server for Windows (Seite 19 von 120) (Englisch)

624433

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

2. Create the Acronis Secure Zone on the server hard disk (see

Chapter 8. Managing the

Acronis Secure Zone

3. Activate Acronis Startup Recovery manager (see

3.4 Acronis Startup Recovery

Manager

) and create bootable media or RIS package with Acronis True Image Echo

Server (see

Chapter 9. Creating bootable

media).

4. Back up (image) the server’s system disk to Acronis Secure Zone (see

5.2 Backing up

disks and partitions (image backup)

). You can back up other disks/partitions as well, but

the system image is mandatory.

When performing Active Restore, the current Acronis True Image Echo Server version

always restores the entire system disk. Therefore, if your system disk consists of several

partitions, all of them must be included in the image. Any partitions which are missing

from the image will be lost.

If failure occurs, boot the server from the bootable media, or RIS server, or using F11.

Start the recovery procedure (see

6.3 Restoring disks/partitions or files from images

select the system disk image from Acronis Secure Zone, choose Use Active Restore and

in the next window click Proceed. In a few seconds the computer will reboot to the

restored system. Log in and start work – no additional reboots or other actions are

required.

You can perform Active Restore running Acronis True Image Echo Server in Windows

operating systems as well. However, it is mandatory to have bootable media in case

Windows cannot boot.

3.6 Acronis Universal Restore

3.6.1 Acronis Universal Restore purpose

A system disk image can be deployed easily on the hardware where it was created or to

identical hardware. However, if you change a motherboard or use another processor

version — a likely possibility in case of hardware failure — the restored system could be

unbootable. An attempt to transfer the system to a new, much more powerful computer

will usually produce the same unbootable result because the new hardware is

incompatible with the most critical drivers included in the image.

Using Microsoft System Preparation Tool (Sysprep) does not solve this problem, because

Sysprep permits replacing drivers only for Plug-and-Play devices (sound cards, network

adapters, video cards etc.). As for system Hardware Abstraction Layer (HAL) and mass

storage device drivers, they must be identical on the source and the target computers

(see Microsoft Knowledge Base, articles 302577 and 216915).

Acronis Universal Restore technology provides an efficient solution for hardware-

independent system restoration by replacing the crucial Hardware Abstraction Layer (HAL)

and mass storage device drivers.

Acronis Universal Restore is applicable for:

1. Instant recovery of a failed system on different hardware

2. Hardware-independent cloning and deployment of operating systems

3. Real-to-virtual and virtual-to-real computer migration for system recovery, test and

other purposes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image Echo Server for Windows Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis True Image Echo Server for Windows

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info