Bedienungsanleitung Acronis True Image Echo Workstation (Seite 77 von 157) (Englisch)

624434

Zoom out

Zoom in

Vorherige Seite

1/157

Nächste Seite

When the backup destination location on the network is not available or not reachable,

the program will attempt to reach the location at the specified time interval.

6.3.12 Dual destination backup

The preset is disabled.

If enabled, the program will automatically place a copy of each backup being created

locally to a separate location on a local drive or network share. The consistency of the

additional archive copy is maintained automatically. After a backup is saved to the main

location, the program compares the updated archive contents to the copy contents, and if

some backups are missing from the copy, they will be copied to the external location

along with the new backup.

In addition to enhancing the archive security provided with replication, this feature allows

traveling users to keep a consistent copy of the laptop data both on the laptop and the

corporate server. When the remote destination for the creation of the archive copy is not

available, e.g. due to the network absence, the program will back up data to the local

destination alone. When connected again, all changes made to the archive will be

transferred to the copy during the first backup operation.

The feature provides quick desktop backup to the internal drive as an intermediate step

before saving the ready backup on the network. This comes in handy in cases of slow or

busy networks and time-consuming backup procedures. Disconnection during the copy

transfer will not affect the backup procedure as opposed to backing up directly to the

remote location.

If saving a backup copy to ASZ please note: even when a password is set for the Acronis

Secure Zone, the copy archive will not be protected with the password.

6.3.13 Wake On LAN

This option is available only for tasks created by the Acronis Group Server.

The preset is Enable Wake On LAN.

With this setting, Acronis Group Server will send a magic packet to the remote computer

network interface card (NIC) before starting backup. (A magic packet is a packet that

contains 16 contiguous copies of the receiving NIC's Ethernet address.) This will power on

the computer for running the backup task. Once the backup procedure is over, the

computer can go to sleep if it times out.

Before using the feature, make sure that Wake On LAN is enabled both on the computers

that you intend to back up and the Acronis Group Server.

To enable the Wake On LAN feature on a computer to be backed up:

1. Enter the computer BIOS and set Power -> Wake On PCI PME -> Power On.

2. Set the NIC properties on the computer as follows.

Control Panel -> System -> Device Manager -> Network adapters -> select the NIC ->

Properties -> Advanced:

Enable PME -> Enabled

Wake On Link Settings -> OS Controlled

Wake On Settings -> Wake On Magic Packet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image Echo Workstation Seite 77

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis True Image Echo Workstation

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info