624434
127
Zoom out
Zoom in
Vorherige Seite
1/157
Nächste Seite
127 Copyright © Acronis, Inc., 2000-2009
This allows:
the fastest replacement of the physical machine with the previously created virtual
copy
moving multiple workloads from legacy physical computers to virtual machines to
reduce hardware maintenance and power consumption costs.
The alternative method of physical to virtual migration is by restoring a physical disk
from an image to a virtual machine. The procedure is the same as with restoring physical
machines.
To ensure booting up the system on the virtual machine, use Acronis Universal Restore. If
the target virtual drive is a SCSI hard drive, provide appropriate drivers. For example, the
VMware environment requires Buslogic or LSI logic drivers. Use drivers bundled with your
virtualization software or download the latest drivers versions from the software
manufacturer’s website. For more information about the recovery procedure see
Chapter
7. Restoring the backup data.
The inverse migration - virtual to physical - is done using common disk imaging and
restoring:
1. Create images of all (or some) virtual machine disks, including the system disk.
2. Restore the images to physical disks. When restoring a system disk, use Acronis
Universal Restore. Complete the hardware driver configuration if Windows prompts.
Combination of the two migration features gives you the flexibility to implement a lot of
scenarios, for example:
replace your physical computer on the network with its virtual copy, while the
computer is recovered or upgraded
test the new software or other changes you wish to make to the computer on its
virtual copy and then apply the changes to the physical computer.
13.3.4 Converting workloads
You can convert workloads from one virtual technology to another through imaging virtual
drives. For example, let’s say your company uses Microsoft Virtual Servers, but you need
to use VMware-based virtual appliances. This is easy to do with the conversion
functionality. Again, a Windows system image will be supplemented with appropriate
system drivers during conversion so that Windows could boot up on the another type of
VM.
1. Create images of all (or some) virtual machine disks, including the system disk.
2. Convert the images to virtual disks of desired format.
3. Create a new VM of the desired type with the converted system disk.
4. Add the other converted disks to the VM.
5. Start the VM and complete the hardware driver configuration if Windows prompts.
13. 4 Converting disk images to virtual disks
To convert a disk image to a virtual disk file:
1. Do one of the following:
127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Acronis True Image Echo Workstation wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Acronis True Image Echo Workstation

Acronis True Image Echo Workstation Bedienungsanleitung - Deutsch - 186 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info