Bedienungsanleitung Acronis True Image Home 2012 (Seite 217 von 229) (Englisch)

471510

217

Zoom out

Zoom in

Vorherige Seite

1/229

Nächste Seite

4. Choose the vhd backup file to be used for recovery by its creation date. When the required vhd

backup is not shown, click Browse, choose Windows Backup Archives (*.vhd) in the "Files of

type" field and locate the backup for recovery.

Even if the required vhd backup is shown on the screen, after you choose it Acronis True Image Home 2012

may display the following message: "Acronis True Image Home 2012 cannot detect volume 1 of

"Backup_Name" archive", where Backup_Name is the name of the chosen backup. This is because disk

letters in the standalone Acronis True Image Home 2012 may differ from those in Windows and the path to

this backup stored in the metadata information will point to the wrong location. In such case click Browse,

choose Windows Backup Archives (*.vhd) in the "Files of type" field and locate the backup for recovery.

5. At the next step select Recover whole disks and partitions (if it is not selected) and click Next.

6. Select the system partition at the What to recover step. Usually you will not need to recover the

MBR.

7. Then specify the settings of the selected system partition: location, type (primary, active) and

size. When recovering the partition to the original location, you do not need to make any setting

changes.

8. Read the Summary of the recovery operations and then click Proceed.

You can also recover partitions and disks from vhd files while working in Windows. This is preferable

for recovering data partitions and disks.

8.10.3 Booting from a tib image of your Windows 7 system

partition

As already mentioned, users of the Enterprise and Ultimate editions of Windows 7 can boot from tib

images of Windows 7 system partition. This allows you to test bootability of the backed up system

without actual recovery. Booting can be done only when running Acronis True Image Home 2012 in

Windows.

If you have Windows 7 Enterprise or Ultimate and want to test whether your Windows 7 system

partition backup will recover to a bootable operating system, proceed as follows:

1. Open Acronis Boot Sequence Manager by clicking Boot Sequence Manager on the Tools &

Utilities screen.

2. Click Add on the toolbar of Acronis Boot Sequence Manager and browse for the required tib file,

then click OK.

3. Because actual booting is performed from VHD, the program needs to convert the selected tib

file so the appropriate dialog will appear.

4. Click OK if you want to save the converted file to the default location with the same name or

browse for another location. Saving to another location allows you to change the name of the

vhd file.

Booting is possible only when the vhd file is located on an NTFS-formatted local hard disk.

If there is not enough space for the converted file in the selected location, the program will

notify you. You can delete unnecessary files and click Retry or cancel the conversion and repeat

the operation choosing another location for the converted file.

5. After the conversion process finishes a new line with the vhd filename will be added to the

Acronis Boot Sequence Manager.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis True Image Home 2012 Seite 217

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis True Image Home 2012

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info