Bedienungsanleitung Acronis Universal Restore (Seite 5 von 5) (Englisch)

624422

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Specify the appropriate drivers by clicking Add driver. The drivers defined here will be installed, with

appropriate warnings, even if the program finds a better driver.

Universal Restore process

After you have specified the required settings, click OK.

If Universal Restore cannot find a compatible driver in the specified locations, it will display a prompt

about the problem device. Do one of the following:

 Add the driver to any of the previously specified locations and click Retry.

 If you do not remember the location, click Ignore to continue the process. If the result is not

satisfactory, reapply Universal Restore. When configuring the operation, specify the necessary

driver.

Once Windows boots, it will initialize the standard procedure for installing new hardware. The

network adapter driver will be installed silently if the driver has the Microsoft Windows signature.

Otherwise, Windows will ask for confirmation on whether to install the unsigned driver.

After that, you will be able to configure the network connection and specify drivers for the video

adapter, USB and other devices.

4.2 Universal Restore in Linux

Universal Restore can be applied to Linux operating systems with a kernel version of 2.6.8 or later.

When Universal Restore is applied to a Linux operating system, it updates a temporary file system

known as the initial RAM disk (initrd). This ensures that the operating system can boot on the new

hardware.

Universal Restore adds modules for the new hardware (including device drivers) to the initial RAM

disk. As a rule, it finds the necessary modules in the /lib/modules directory. If Universal Restore

cannot find a module it needs, it records the module’s file name into the log.

Universal Restore may modify the configuration of the GRUB boot loader. This may be required, for

example, to ensure the system bootability when the new machine has a different volume layout than

the original machine.

Universal Restore never modifies the Linux kernel.

Reverting to the original initial RAM disk

You can revert to the original initial RAM disk if necessary.

The initial RAM disk is stored on the machine in a file. Before updating the initial RAM disk for the

first time, Universal Restore saves a copy of it to the same directory. The name of the copy is the

name of the file, followed by the _acronis_backup.img suffix. This copy will not be overwritten if you

run Universal Restore more than once (for example, after you have added missing drivers).

To revert to the original initial RAM disk, do any of the following:

 Rename the copy accordingly. For example, run a command similar to the following:

mv initrd-2.6.16.60-0.21-default_acronis_backup.img

initrd-2.6.16.60-0.21-default

 Specify the copy in the initrd line of the GRUB boot loader configuration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Acronis Universal Restore Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Acronis Universal Restore

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info