515769
16
Zoom out
Zoom in
Vorherige Seite
1/125
Nächste Seite
G12 Remote Controller
Temperature Setting
To set the desired room
temperature, press the button to
increase or decrease the set
temperature.
The temperature setting range is
from 16°C to 30°C
Press both buttons simultaneously
to toggle the temperature setting
between °C and °F
Turbo Mode
Press the TURBO button to
achieve the required set
temperature in a short time.
ON Timer Setting
Press the SET button will activate
the on timer function.
Set the desired on time by pressing
the SET button continuously.
Press the CLR button to cancel the
off timer setting
Sleep Mode
Press the button to activate sleep
mode. This function is available
under COOL, HEAT & AUTO
mode.
When it is activated in COOL
mode, the set temperature will be
increased 0.5°C after 30mins, 1°C
after 1 hour and 2°C after 2 hours.
When it is activated in HEAT
mode, the set temperature will be
decreased 1°C after 30mins, 2°C
after 1 hour and 3°C after 2 hours.
Personalised Setting
Press and hold the button for 3s to
initiate personalized setting.
Set the individual setting e.g.
MODE, SET TEMP or FAN SPEED
and leave for 4s to save
2 groups of settings are allowed to
stored in the handset
Fan Speed Selection
Press the button until the desired
fan speed is achieved.
Operating Mode
Press the MODE button to select
the type of operating mode.
For Cooling only unit, the available
modes are: COOL, DRY & FAN.
For Heatpump unit, the available
modes are: AUTO, COOL, DRY,
FAN & HEAT.
OFF Timer Setting
Press the SET button will activate
the off timer function.
Set the desired off time by
pressing the SET button
continuously.
Press the CLR button to cancel the
off timer setting
Automatic Air Awing
Press the SWING button to activate
the automatic air swing function.
To distribute the air to a specific
direction, press the SWING button
and wait until the louver move to
the desired direction and press the
button once again.
On/Off Button
Press Once to start the air
conditioner
Press again to stop the unit
Clock Time Setting
Press button + or - to increase or
decrease the clock time.
Ionizer
Press the button to activate the
negative Ion function, which will
refresh the indoor air effectively.
14
Controllers
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Acson A5CM 25 E-ER wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info