620411
10
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
System Control - ACVMax: 660Y2800 • B
en
10
EN
FR
NL
ES
IT
DE
PL
RU
APPLIANCE DESCRIPTION AND OPERATION
CH & DHW Settings / Heating settings (Cont’d)
Heating Settings
Heating Operation Enabled
Demand Thermostat & Setpoint
Abs. Max. CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 49°C
Outdoor Curve / Coldest Day -12°C
Heating Settings
Heating Operation Enabled
Demand Thermostat & Setpoint
Abs. Max CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 49°C
Outdoor Curve / Coldest Day -12°C
Abs. Max
CH Setpoint
87°C
20°C 87°C
Absolute Max CH Setpoint limits the setpoint during a central heating call. This setting can
be used to prevent a user from adjusting the central heating setpoint or outdoor curve above
a safe operating temperature in the EZ Setup Menu. A warning screen will be displayed in EZ
Setup if the user attempts to raise the setpoint above the Absolute Max CH Setpoint. The Ab-
solute Max CH Setpoint will be displayed on the outdoor curve in EZ Setup if the user selects an
outdoor curve which goes above the Absolute Max CH Setpoint.
Press the LEFT or RIGHT buttons to adjust the Absolute Max CH Setpoint then press the OK
button to store the setting.
Default: 87°C
Heating Settings
Heating Operation Enabled
Demand Thermostat & Setpoint
Abs. Max CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 49°C
Outdoor Curve / Coldest Day -12°C
CH1 Max.
Setpoint
82°C
20°C 87°C
CH1 Maximum Setpoint is the maximum setpoint for a CH1 heating call when an Out-
door Curve option is chosen in Demand Type. CH1 Maximum Setpoint is the xed setpoint
for a CH1 heating call when a Setpoint option is chosen in Demand Type.
Press the LEFT or RIGHT buttons to adjust the CH1 Maximum Setpoint then press the OK
button to store the setting.
Default: 82°C
Heating Settings
Heating Operation Enabled
Demand Thermostat & Setpoint
Abs. Max CH Setpoint 87°C
CH1 Max. Setpoint 82°C
CH1 Min. Setpoint 49°C
Outdoor Curve / Coldest Day -12°C
CH1 Min.
Setpoint
49°C
15°C 87°C
CH1 Minimum Setpoint is the minimum setpoint for a CH1 heating call when an Out-
door Curve option is chosen in Demand Type. This setting is not applicable when a Set-
point option is chosen in Demand Type.
Press the LEFT or RIGHT buttons to adjust the CH1 Minimum Setpoint then press the OK
button to store the setting.
Default: 49°C
49
18
82
CH1 (°C)
O.T. (°C)
-12
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ACV Prestige Solo wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info