620411
20
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
System Control - ACVMax: 660Y2800 • B
en
20
EN
FR
NL
ES
IT
DE
PL
RU
APPLIANCE DESCRIPTION AND OPERATION
CH & DHW Settings / Boiler Settings
Boiler Settings
Boiler Settings
Prestige Model Solo (2 pumps)
Lockout Temp. 221°F [105°C]
Modbus Address 1
Pump settings
Ignition Level NAT 3100rpm
Prestige Model
Solo (2 pumps)
Solo/Excel. (3 way valve)
The Boiler Settings menu contains settings related to boiler operation. Each line contains
a boiler setting followed by its current value. Four boiler settings are available.
Press the UP or DOWN buttons to scroll through the settings, then on OK to validate your
selection.
The Prestige Model menu allows to select the boiler type and access specic settings
for that appliance in other menus. The selection “Solo (2 pumps) is applicable to Prestige
42-50-75-100-120 Solo, and Solo/Excel. (3-way valve) is applicable to Prestige 24-32 Solo/
Excellence boilers.
Boiler Settings
Prestige Model Solo (2 pumps)
Lockout Temp. 221°F [105°C]
Modbus Address 1
Pump settings
Ignition Level NAT 3100rpm
Lockout Temp.
39°C / 102°F
221°F [105°C]
This boiler setting allows testing of the Overheat thermostat function at a reduced tem-
perature. It temporarily decreases the overheat temperature of the appliance to 39°C which
allows a safe demonstration of the function.
Press the UP or DOWN buttons to scroll through the settings, then on OK to validate your
selection.
Default: 105°C
Boiler Settings
Prestige Model Solo (2 pumps)
Lockout Temp. 221°F [105°C]
Modbus Address 1
Pump settings
Ignition Level 3100rpm
Modbus Address
1
0=BCST 247
This parameter sets the Modbus address of the appliance in a Modbus based communica-
tion system.
Press the LEFT or RIGHT buttons to adjust the settings, then on OK to validate your
selection.
Default: 1
Boiler Settings
Prestige Model Solo (2 pumps)
Lockout Temp. 221°F [105°C]
Modbus Address 1
Pump settings
Ignition Level 3100rpm
Pump Settings
Current Pump Cong Modied
Preset Pump Cong
Flexible Pump Cong
The Pump Settings menu allows to choose the right pump conguration to the chosen
hydraulic conguration. There is a preset conguration mode and a exible conguration
mode.
Press the UP or DOWN buttons to scroll through the options, then on OK to validate your
selection.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ACV Prestige Solo wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info