Bedienungsanleitung Adapt ADK-200 (Seite 1 von 1) (Englisch)

471512

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

Adapt ADK-200 iPAD/iPhone 4

Bluetooth Keyboard Manual

Packing Includes:

1 Adapt ADK-200 iPAD/iPhone 4 Bluetooth keyboard

2 IPAD/IPHONE 4 case (optional)

3 ADK-200 English Manual

4 USB charging cable for use with the ADK-200 Mini USB keyboard version (The

Apple 30-pins version does not have a charging cable included, you can use the

iPAD/iPhone 4’s original Cable)

Product Features:

1 Broadcom 2042 main control chip with Bluetooth 2.0 interface.

2 ADK-200 is using the industries leadings Bluetooth solution:

WIDCOMM BTW Bluetooth software.

3 Specially design for IPAD/IPHONE 4/iPhone 4 with multimedia

control function keys

4 Built-in power management software

5 Silent key design

6 It is splashwaterproof and dustproof

7 Works also with PC via HID profile

8 Working temperature :-20℃-55℃ humidity:20%-50%

9 Built-in lithium battery

Specifications :

1 Standard: Bluetooth V2.0

2 Working distance: upto 10 meters

3 Modulation system: FHSS 2.4G

4 Transmitting power: Class 2

5 Operating voltage: 3.0-5.0

6 Work current: <5.0MAh

7 Standby current: 2.5MAh

8 Sleeping current: <200UA

9 Charging current:> 100MAh

10 Standby time: 100days

11 Maximum working time: 25 days

12 Uninterrupted working time: 90 hours

13 Charging time: 4-4.5 hours

14 Li-ion battery capacity: 430MAh

Attentions:

1 Keep the keyboard away from sharp objects.

2 Do not put heavy object on the keyboard

3 Keep away from oil or any other chemical liquids.

4 Make sure the keys are not pressed when you store your keyboard

5 The keyboard can be washed with water and a mild detergent, or

alcohol

Sleep Mode:

The ADK-200 will go into sleep mode after not being used for 15

minutes. In order to get the keyboard out of sleep mode, simply press

any key on the keyboard and after 3 seconds it will work again.

TROUBLESHOOT GUIDE:

1 If you are unable to connect the Bluetooth Keyboard to the

computer, please follow the steps below:

(1) Before you install your Bluetooth Keyboard, please make sure

the Bluetooth is turned on

(2) Press and release the connect button on the top of Bluetooth

Keyboard. The Bluetooth LED will flash to show it is able to pair

with your iPAD/iPhone 4/iPhone 4

(3) Make sure that the keyboard is within the effective range, less

then 10 meters (or around 300 feet)

(4) If you have to many Bluetooth devices paired with your

iPAD/iPhone 4/iPhone 4, try to reduce the number of connected

devices

(5) Check if the power LED is blue and not blinking red

(6) Make sure your iPAD/iPhone 4 is functioning properly

FCC Caution: Any change or modifications not expressly approved by the

party responsible for compliance could void the user’s authority to operate

this equipment.

IMPORTANT NOTE:

FCC Radiation Exposure Statement:

1. This equipment complies with FCC radiation exposure limits set

forth for an uncontrolled environment. End users must follow the

specific operating instructions for satisfying RF exposure

compliance.

2. This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

Apple function keys:

The ADK-200 has special function keys to control the multimedia functions

of your iPAD/iPhone 4. Below we have listed them for you.

The F5 function key will pop-up the iPAD/iPhone 4 onscreen

keyboard

The F6 function key will open the iPAD/iPhone 4 search function

The F7 function key will select the previous song in the

iPAD/iPhone 4 iPOD menu

The F9 function key will select the next song in the iPAD/iPhone

4 iPOD menu

The F10 function key will mute the song (it will keep playing in

the background)

The F11 function key will decrease the volume

The F12 function key will increase the volume

This key will return you to the HOME screen from the iPAD/iPhone

4. Press it again and it will switch to the search function. Press it

once more and it will return you to the “HOME” screen.

The F8 function key will start playing the selected song in the

iPAD/iPhone 4 iPOD menu, press it again and it will pause,

press it again and it will start to play again

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device.

Pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio

frequency energy and, if no installed and used in accordance with the

instructions, may cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one of the

following measures:

● Reorient or relocate the receiving antenna

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected

● Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

2 IMPORTANT NOTE:

After switching of the keyboard power and Bluetooth from you iPAD/iPhone

4, the keyboard can automatically reconnect without re-entering the pairing

code. To do this first turn on the keyboard and after that switch on the

Bluetooth from your iPAD/iPhone 4. Then wait till the Bluetooth indicator

LED from your keyboard turns off and then press the ENTER key on your

ADK-200 keyboard. Note that it might take over 30 seconds before the

keyboard and iPAD/iPhone 4 reconnect, please keep that in mind.

If you do not use the keyboard for 15 minutes it will enter a sleep mode.

When you want to use it again, press a key and wait till ADK-200 wakes up

again

(3) Click on the “Setting” button on your iPAD/iPhone 4’s home

screen, then choose “General” and select “Bluetooth”. Turn the

Bluetooth switch to “ON” and the iPAD/iPhone 4 will start looking for

Bluetooth devices.

Installation of the ADK-200 Bluetooth

Keyboard

1 How to connect the ADK-200 Bluetooth Keyboard to you

IPAD/IPHONE 4.

Step 1: Find the keyboard

(1) Switch the toggle switch to “ON” , the power light and Bluetooth

light will light up for 3 seconds. After this it will turn of and the

keyboard is in operation mode.

(2) Press the connect button ,the Bluetooth light will be flashing and

the Power light will be on, the keyboard is now in pairing mode.

15 Lithium battery life: upto 3 years

16 Lithium battery specifications: 4.5 * 24 * 47MM

17 Key strength: 80 ± 10g

18 Key life: upto 500 million strokes

19 Operating temperature: -20 - +55 Degrees Celcius

20 Storage temperature: -40 - +70 Degrees Celcius

Charging interface

Charging procedure as follows：

1. Connect the Micro USB cable or iPAD/iPhone 4 cable (depending

on the model) to the charging interface. The keyboard can charge

both during use and in off function. We advise however to always

charge the keyboard when it is turned off, this will increase the

lifetime of the battery. We advise also to only charge the ADK-200

after the red power light starts to blink, again to save the lifetime of

your battery.

Charge:

If the keyboard will run out of power the power LED will start to flash

indicating it is time to charge the keyboard.

After successful connection, the keyboard power light will keep

burning. If you stop using the keyboard do not forget to switch it off.

The keyboard is working now

Storage:

1 When you are finished using your keyboard do not forget to switch

it off to extend the battery life.

2 When you do not intend to use your keyboard for a longer period,

try to store it with at least half a battery load, this will extend the life of

the Li-ion battery.

Note: When storing the keyboard, do not fold it!

2 During charging the “Charge indicator light” will burn red, when the

keyboard is fully charged it will turn off (charging time: 4.5 hours.)

Charging interface

Connect button

Bluetooth indicator light

Power indicator light

Charging indicator light

Power Swithch

The iPAD/iPhone 4 will list the keyboard as “Bluetooth Wireless

Keyboard”, click on this and it will prompt you to type the passkey

onto the ADK-200 keyboard. Type the password on the keyboard and

press “ENTER”. The “Bluetooth Wireless Keyboard status will be

“Connected” and you can start using the keyboard.

Step 2: Enter the password and connect

Step 3: Connect successfully, the keyboard is in working mode

iPAD is in searching mode and will

find the Wireless Buetooth Keyboard

A pop-up field with the password shows, type this

password on the ADK-200 and press “ENTER”

Adapt ADK-200 iPAD/iPhone 4

Bluetooth Keyboard Manual

Adapt ADK-200 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info