Bedienungsanleitung ADB Domino 24 (Seite 12 von 68) (Englisch)

461420

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

DOMINO 24 & 48 USER MANUAL

www.adblighting.com

User Manual - page 10

Issue 1.2

• Do not apply excessive force to any of the controls. Spare parts and service are

available from your ADB distributor, but prevention is better than cure.

• When connecting any devices to the DOMINO, make sure that all connections are

correct before switching on the power. If any doubt exists, obtain the assistance of

qualified personnel.

• If your DOMINO is to be used "on the road", you should use the optional flight case to

protect the desk. Transport the DOMINO with all faders in the fully down position.

This gives the faders maximum protection from probable damage. When your

DOMINO is not in use, cover the upper surface with the optional dust cover. If the

surface of your DOMINO becomes soiled, clean it with a damp cloth. Do not use any

powerful solvents. An alcohol swab may be used to remove any gum from labelling

tape.

• Areas are provided below the faders for you to write identifying labels. To prevent

permanent marking of your DOMINO, ADB recommends that you place strips of

"write on" tape in these areas.

1.8 TERMINOLOGY

Certain button stroke terminology is used throughout this manual to describe the particular

operations being undertaken. Any text enclosed in these symbols [ ], refers to when that

particular button needs to be pressed.

For example; Press [record memory], means to press the record memory button.

Flash/assign buttons are often abbreviated to [f/a]. If the button to be pressed is a

Flash/Assign button (of which there are many) then it will be identified by naming it as

follows; [f/a] (Name).

Any information that appears on the LED display is printed in “quotes”.

1.8.1 SECONDARY FUNCTIONS

Some f/a buttons have secondary functions that are activated by holding down the [function]

button and tapping an [f/a] button. These secondary functions are printed on the front panel

below their f/a buttons.

Some flash buttons have hidden secondary functions that are activated by holding down the

[function] button and tapping the [ok] button. These secondary functions are not labelled but

are described in the “Diagnostics” section of the “UTILITIES” section.

The buttons below the EDIT wheel have secondary functions in that they are used to answer

either “Yes”, “No” or “OK” to questions that appear on the display when you are performing

certain actions. They are typically used to confirm or abort the action that you have selected.

1.9 SOFTWARE

ADB Lighting Technologies has a policy of continuous improvement of its products. As the

DOMINO is a computerised lighting desk, its software is subject to this policy as new

features are added and existing features improved.

The software version of your DOMINO is momentarily displayed on the LED display when

the DOMINO is switched on. The latest version can be downloaded from the ADB website.

http://www.adblighting.com

Whilst every care is taken in the preparation of this manual, ADB Lighting Technologies

takes no responsibility for any errors or omissions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ADB Domino 24 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ADB Domino 24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info