Bedienungsanleitung ADB Domino 24 (Seite 56 von 68) (Englisch)

461420

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

DOMINO 24 & 48 USER MANUAL

www.adblighting.com

User Manual - page 54

Issue 1.2

Select the audio frequency of the dominant beat in the music. Try a low frequency to pick up

a bass guitar or set it higher to select a drum or cymbal.

Note: When you select a different frequency, the audio level of that frequency might be

different from the previous frequency. You might need to repeat the “level” and

“frequency” adjustments to get satisfactory stepping of your chaser.

When finished press;

[edit].

To step a chaser with the STL you have created, the chase must be connected to the STL as

described above.

16.5 SYNCOBEAT MODE

SyncoBEAT allows you to teach the DOMINO a beat pattern that it will then repeat

indefinitely. When a chaser is connected to an STL that is in SyncoBEAT mode, the chasers

own internal speed generator is disconnected and the STL’s SyncoBEAT has total control of

stepping.

SyncoBEAT allows for a syncopated (non regular) pattern to be learned. You tap out a beat

pattern and the DOMINO learns the pattern then repeats it indefinitely. A syncopated pattern

allows you to have, for example some rapid steps followed by maybe a long pause and then

steps getting faster or possibly slowing down.

Any quantity from 1 to 20 beats can be entered in the beat pattern.

To create a SyncoBEAT;

HOLD [function], tap [f/a] (stl 1) or (stl 2).

The display scrolls a message showing the current mode of the STL.

Tapping [yes], toggles the STL between either Sound To Light mode or SyncoBEAT mode.

Turn SyncoBEAT ON.

The current mode of each STL is shown at the bottom of the video screen. The letter “B”

indicates SyncoBEAT mode.

To learn a beat pattern;

HOLD [add] until the word “Learn” appears on the display.

Whilst holding [add], enter your beat pattern by tapping [ok].

The beat pattern starts from the first tap of the [ok] button and ends when the [add] button is

released. Remember that when the DOMINO repeats your beat pattern, the time between

the last tap and the first tap is determined by the time between your last tap and when your

release the [add] button.

The “stepping beat indicator” on the video screen now moves to the beat that you have

created.

If the beat pattern is not correct, create a new SyncoBEAT pattern by holding [add] and

repeating the procedure. The new pattern will replace the old pattern as soon as the [add]

button is released.

When the beat pattern is correct press;

[edit] to exit.

To step a chaser with the SyncoBEAT you have created, the chaser must be connected to

the STL as described above.

If a chaser has been set to “Single Shot Mode”, triggering the single shot will run the chaser

once using the SyncoBEAT stepping.

See the “CHASERS” section for more details on chases.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ADB Domino 24 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ADB Domino 24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info