Bedienungsanleitung ADB Domino 48 (Seite 48 von 68) (Englisch)

461421

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

DOMINO 24 & 48 USER MANUAL

www.adblighting.com

User Manual - page 46

Issue 1.2

13.5 CUE LIST TIMES

13.5.1 FADE TIMES

The times of the crossfade from one step to the next are determined by the settings that

have been recorded for each step. This can be the manual with the rotating speed fader as

well as a set time. The transition from one step to the next is in the form of a DIPLESS

CROSSFADE. The incoming step will fade up in the IN time for that step and the outgoing

step will fade down in the OUT time for that step.

13.5.2 LINK TIMES

If a step contains a LINK time, then when that step is played, its link time starts counting

down. At the completion of the link time, the cue list will automatically step to the next step. If

every step has a link time, then the cue list will play like a chase, but with the following

differences.

• The duration of every step may be individually set by its link time.

• The in and out fade times of every step may be individually set.

• A step may be a chaser.

This allows you to create very complex and interesting chasers.

Hint: If you need a link time in every step of a cue list (to make it chaser) it is much quicker to

set the default link time using the preference function rather than setting every individual

step. See the “UTILITIES” section for details.

13.6 EDITING A CUE LIST

You may edit a cue list live or blind (faded down) on the cue list master or directly in its

submaster memory location. If the cue list is faded up on stage you will see the changes. If

the cue list is not live on stage, its steps are displayed on the channel LED indicators and on

the video monitor. You can add or delete steps, change fade and link times and edit the

contents of each step (including channels not already on in the step).

• To edit the cue list on the cue list master, press; [edit], [cue list flash].

• To edit a cue list in submaster memory, press;[edit], [Bank B] (optional),

[f/a] (cue list number)

The display momentarily shows the Bank B/page/cue list number or name and then it shows

step number and its contents.

If you edit the cue list on the cue list master, the current step will be selected. If you edit a

cue list in submaster memory, step 1 will be selected.

Step through the cue list using the [<] or [>] buttons below the EDIT wheel.

The indicators in the channel F/A buttons show the channel levels in each step.

The [function], [remove] and [add] buttons also flash to show that they are active.

Their uses are described below.

When finished editing, press [edit].

Changes are automatically saved.

13.6.1 ADD A STEP

To add a step to a cue list, first edit the cue list (above) then step through the cue list using

the [<] or [>] buttons below the EDIT wheel.

Select the step after which the new step is to be inserted, then press [add].

• To select a submaster memory as the added step, press; [Bank B] (optional), [f/a]

(submaster memory).

• To record a snapshot (of the current output) as the added step press; [record submaster

memory].

To select a chaser as the added step, press; [Bank B] (optional), [f/a] (chaser).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ADB Domino 48 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ADB Domino 48

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info