Bedienungsanleitung ADB ME1163 (Seite 26 von 68) (Englisch)

461422

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

DOMINO 24 & 48 USER MANUAL

www.adblighting.com

User Manual - page 24

Issue 1.2

Each time the faders are moved full travel, or the <GO> key is pressed; the contents of

Preset are transferred to Stage. The previous contents of Stage are removed from the

playback and the next theatrical memory in the sequence is automatically loaded into the

Preset when the fade completes.

When in sequential mode, the LED in the <SEQ> key is lit and “SEQ” is displayed on the

monitor.

7.5 USING THE PLAYBACK WITH MANUAL FADES

The X-fade can be operated manually by moving the fader pairs. Manual fades can be made

in sequential or non-sequential mode. Manual fades are timed and profiled by the operator

each time they are played: the look of the fade follows the fader movements.

• If both faders are moved together at an even pace, a straight crossfade results.

• If one fader is moved before the other, a split crossfade occurs.

• If the preset fader only is moved, the content of the Preset are added to the Stage.

• If only the Stage fader is moved, the Stage content is removed from the playback,

thus resulting in a blackout (unless there is some other output).



Careful manipulation of the faders can result in a profiled fade where the fade rate changes

throughout its duration. For example, the crossfade could be started slowly and increased in

speed as the fade progresses. Many operators prefer working in this way, and the use of

high quality faders ensures maximum response from this method.

7.5.1 CONTINUING A MANUAL FADE AUTOMATICALLY

A fade that is started manually can be taken over automatically by pressing the [GO] button

at any point during the fade. When this occurs, the system calculates the remaining fade time

relative to the position of the faders, and uses that as the automatic fade time.

For example, if a memory has a time of 10 seconds and the [GO] button is pressed when the

faders are exactly half-way through their travel, the fade will automatically complete in 5

seconds - half of the original fade time. Both faders must be returned to one of the end-stops

before the next memory can be played back manually.

7.6 USING THE PLAYBACK WITH TIMED FADES

Playbacks can be operated automatically by pressing the [GO] button. Auto fades can be

made in sequential or non-sequential mode.

An automatic fade transfers the contents of the Preset to the Stage, following the fade times

of the memory, or using the default times if none were plotted. The times used in an auto

crossfade are those of the memory in Preset. The previous contents of Stage are removed

from the playback and the next memory in the sequence is automatically loaded into the

Preset when the fade completes.

Using auto fades ensures that the look of the transition is the same for every performance,

and helps to tie the lighting change in with action or music.

Each time the [Go] key is pressed, the contents of Preset are transferred to Stage. The LED

in the [Seq] button flashes quickly to indicate the pause.

If [Go] is pressed a second time, while a fade is still running, Pauses the progress of the

fade. The LED in the [Seq] button flashes slowly to indicate the pause. Pressing [Go]

resumes the progress of the fade.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

ADB ME1163 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von ADB ME1163

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info