Bedienungsanleitung Ade BA 724 Julia (Seite 8 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

641846

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

4. Weighing function (weight measurement only)

1. Switch on the scale by using the tap-on-function. For this tap with your foot

shortly on the centre of the scale. A short peep tone will sound and the display

indicates the signal „888“ and a few seconds later 0.0 kg. Now the scale is ready

to use.

2. Step on the centre of the scale. Remain stationary on the weighing platform and

do not you hold tight. After a few seconds your weight will be indicated.

3. After weighing step off the scale. The scale will switch off automatically after a

short peep tone.

5. Programming / Enter of personal data

Before first-time use your personal data like gender (female or male), body height, age

and fitness level (A1 = no sport, A2 = occasional sport, A3 = regular sport, A4 = daily

sport, A5 = athlete) must be programmed and saved under selected locations 1 – 12

(up to 12 persons). The enter keys are located below the display. To enter your

personal data please utilise the buttons:

(on button), — (minus button), + (plus button), (save button) and follow the

particular points:

1. Press the button

and the display indicates a

flashing „01“. To select your personal location

(1–12) press the button (+) or (—). After you’ve

selected the location press the button

to save

the reading.

2. After you’ve selected your personal location

(e.g. personal location 03) the symbol for gender

starts to flash. To select the requested gender

(

for female or for male), press the button

(+) or (—). After the selection for your gender

press the button

to save the reading.

3. After you’ve selected your gender (e.g. female)

the symbol for body height starts to flash (default

170 cm). To enter your height press the button

(+) or (—). After the selection for your height

press the button

to save the reading.

4. After you’ve selected your body height the symbol

for age starts to flash (default 30 AGE). To enter

your age press the button (+) or (—). After the

selection for your age press the button

to save

the reading.

5. After you’ve selected your age the symbol for

fitness level starts to flash (default A 1). To enter

your fitness level (A 1 – A 5) press the button (+)

or (—). After the selection of your fitness level

press the button

to save the reading.

After completion of the input you will hear a short peep tone and the scale automatically

powers off. To enter personal data of further persons please repeat the steps listed

below.

6. Body Analysis

An analysis is only possible in bare feet. Your personal data must be entered first

(please see page 4 - 5).

1. Switch on the scale by using the tap-on-function. For this tap with your foot a few

seconds on the centre of the scale. The display pass through from 01 to 12 and back

to 01. Take off your foot from the scale when the display indicates the selected

location for your personal data.

2. At the first time measurement, the display indicates the signal „888“ and a few

seconds later „0.0” kg. When you once used the scale the display indicates „888“ not

anymore but the readings of your last measurement. This function allows you to

follow the changes between your measurements.

3. As soon as “0.0” kg appears on the display the scale is prepared for the

measurement.

4. Carefully step on the scale in bare feet and remain stationary while the measurement

is now taking place.

5. After a short peep tone, your weight will be indicated. Shortly after, while the analysis

is taking place, the signal „o“ starts to move. After completion of the measurement,

the display indicates as follows:

1. Your weight and your body fat % and as bar graph an evaluation: underweight,

normal weight, slightly overweight, overweight

2. Your ideal weight in kg and your body water %

3. Your bone mass in kg, your muscle mass % and your daily calories requirement

in Kcal.

Your measured values will be shown in changes successively 3 times.

A 1

170

AGE

03 A 1

170

AGE

03 A 1

170

AGE

A 1

170

AGE

4 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ade BA 724 Julia Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info