Bedienungsanleitung Ade KE 1100 Annabelle (Seite 4 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

642020

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Thank you for purchasing this high-quality product made by ADE Germany. You have

acquired a set of scales that meet highest technical standards and are of proven quality.

Please read these operating instructions carefully before using the first time and keep

them in a safe place where you can find them whenever you need the information

contained in the instructions.

1. Putting into Service

Activate the batteries / Replace batteries:

To replace the battery open the battery compartment. Move the battery at the recess

downwards and the battery will be easy to take out. Make sure that you do not bend the

contact. Insert the new battery (1 x CR2032) and close the battery compartment.

Safety guidelines:

Ensure that no objects fall onto the scales; otherwise, the scales

may be damaged.

Only use a damp cloth to clean the scales. Never use solvents

or abrasive cleaners. Do not put the scales under water. You

must clean all the plastic parts of the scales immediately after

they come into contact with grease, spices, vinegar or any other

spiced or coloured foods. Avoid any contact with citric acid.

To remove the bowl (e.g. for cleaning) push the pushbutton below the handle and

remove the bowl.

2. Operation

Switching on the scales:

To switch-on the scales push the ON/OFF/TARA-button. At first, the LCD indicate for a

few seconds the characters ”8888” and after the scales have stabilised, they display

“0 g“. The scales are now ready to weigh.

Units of weight / Liquid mode:

A longer push of the Hold/Unit-button in weighing mode allows you to change the unit of

weight (g = gram / lb:oz = pound ounce / ml = millilitre / fl.oz = fluid ounce). If you have

chosen the mode ml (millilitres), you can push the liquid-button (drop symbol) to weigh

water, milk, or oil. Please ensure that the scales are set to the appropriate units of weight

for you.

Weighing:

Place the scales on a firm, level base and switch-on the scales. After the scales have

stabilised, they display “0 g“. Put the item to be weighed into the bowl. After stabilization

of the weight indication, the weight of the placed item is readable in the display.

Hold-func tion:

By pushing the Hold/Unit-button, while the weight indication is stable you can hold the

reading. When Hold-function is active, the symbol “H” appears in the display. To

deactivate the Hold-function push the Hold/Unit-button again.

Tare-function:

Pushing the ON/OFF/TARA-button allows you to set the scales to “0 g”. Put the weighing

charge into the bowl. Upon the weight is indicated and stable push the ON/OFF/TARA-

button and in this way set the scales back to “0 g”. You can repeat this procedure as

often as you like until the total capacity of the scales (5 kg) has been reached. After you

remove the item(s) to be weighed, the total weight is displayed as a minus value. Please

take care not to move the weighing platform during the tare procedure.

Automatic switch-off the scale:

If the indicated weight does not change within approx. 90 seconds, the scales switches-

off automatically. You can switch-off the scales manually after you have finished using

them by pushing the ON/OFF/TARA-button for approximately two seconds.

3. Error Messages

“LO“ = Indication that the battery is flat - Please replace the battery

with the intended type (one type CR2032).

“Err“ = Overload display - The 5 kg maximum capacity of the scales

has been exceeded. Immediately remove the load from the

scales; otherwise, the load cell could be damaged.

4. Technical Data

Capacity x graduation: max. 5 kg x 1 g

Max. volume bowl: 2.5 litre

Dimensions: 290 mm x 220 mm x 150 mm

Battery: 1 x CR2032 (included)

Subject to technical changes due to further-development of the product.

5. Guarantee

ADE guarantees to rectify any defects due to material or manufacturing defects by means

of repair or replacement free of charge for a period of three years. When making a

guarantee claim, please return the scales together with the sales slip to your retailer and

stating the reasons for the claim.

Open the

lid of the battery compartment on the bottom

of the

scales and remove the battery safety strip. Please observe the

correct polarity of the battery (+/-).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ade KE 1100 Annabelle Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info