Bedienungsanleitung Ade KE 1203 Ellen (Seite 4 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

642012

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Thank you for purchasing this high-quality product made by ADE. You have acquired a

set of scales that meet the highest technical standards and are of proven quality.

Please read these operating instructions carefully before using the product for the first

time and keep them in a safe place where you can find them whenever you need the

information contained in the instructions.

1. Putting into service

Activate / Replace batteries:

To replace the battery open the lid of the battery compartment. Move the battery at the

recess downwards. In this way, the battery will be easy to take out. Make sure that you

do not bend the contact. Insert the new battery (1 x CR 2032) and close the lid of the

battery compartment.

Safety information:

Ensure that no objects fall onto the scales; otherwise, the scales

may be damaged.

Only use a damp cloth to clean the scales. Never use solvents

or abrasive cleaners. Do not put the scales under water. You

must clean all the plastic parts of the scales immediately after

they come into contact with grease, spices, vinegar or any other

strongly spiced or coloured foods. Avoid any contact with citric

acid.

2. Operation

Switch-on the scale:

Place the scales on a firm, level base. Switch-on the scales by a short press onto the

ON/TARE/OFF-button at the right side of the scales. At first, the LCD display shows

“8.8.8.8” and all symbols. After the scales have stabilised, the indication will be “0 g“.

The scales are now ready to weigh.

Units of weight:

To set the unit of weight (g = gram / lb: oz = pound: ounce / ml = millilitre / fl: oz = fluid:

ounce) switch-on the scales. As soon as the display indicates “8.8.8.8”, shortly press the

ON/TARE/OFF-button repeatedly until the requested unit of weight appears. Please

ensure that the scales are set to the appropriate units of weight for you.

Tare-func tion:

Pressing the ON/TARE/OFF-button allows you to set the scales to "0 g". Place a bowl, for

example, on the platform of the scales, press the ON/TARE/OFF-button and in this way

set the scales back to "0 g". You can repeat this procedure as often as you like until the

total capacity of the scales (5 kg) has been reached. After you remove the item(s) to be

weighed, the total weight is displayed as a minus value.

Automatic - / manua l switch-off the scale:

If the indicated weight does not change within approx. two minutes, the scales will

automatically switch-off. To save the battery you can also manually switch-off the scales

by pressing the ON/TARE/OFF-button for about 2 seconds.

3. Error Messages

“Lo“ = Indication that the battery is flat - Please replace the battery

with the intended type (1 x CR 2032).

“EEE E“ = Overload display - The 5 kg maximum capacity of the scales has

been exceeded. Immediately remove the load from the scales;

otherwise, the load cell could be damaged.

4. Technical Data

Capacity x graduation: max. 5 kg x 1 g

Dimensions: 157 mm x 224 mm x 17 mm

Battery: 1 x CR 2032 (included)

Subject to technical changes due to further-development of the product.

5. Guarantee

ADE guarantees to rectify any defects due to material or manufacturing defects by means

of repair or replacement free of charge for a period of three years. In the case of guarantee

claims, please return the scales together with the sales slip to your retailer and stating the

reasons for the claim.

CE Declaration of Conformity

This device is interference-suppressed in accordance

with the applicable EU directive 2004/108/EC

Note: Extreme electromagnetic influences, e.g. when operating radio communication

equipment is being operated next to the scales, can affect the displayed value. When the

interference is over, you can use the product for its intended purpose again; it may be

necessary to switch it on again.

Open the lid of the battery compartment on the bottom

of the

scales and remove the battery safety strip

. Please observe the

correct polarity of the batteries (+/-).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ade KE 1203 Ellen Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info