Bedienungsanleitung Ade KE 1424 Muriel (Seite 4 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

641989

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Thank you for deciding to purchase this high-quality product from the ADE Company.

You have purchased a set of scales of the highest technical standard and proven quality.

Please read through this operating manual carefully before starting-up the scales for the

first time, and keep it in a safe place so that this information is available to you when you

need it.

1. Start-up

Inserting the batteries:

Open the battery compartment cover at the back of the scales and insert the provided

batteries (2 x 1.5V AAA). Please be mindful of the correct polarity of the batteries (+/-).

Safety information:

Please take care not to let any objects fall onto the scales,

otherwise the scales could be damaged.

Only clean the scales with a damp cloth. Do not use any solvents or

abrasive cleaning products. Do not immerse in water. All plastic

parts of the scales should be cleaned immediately after contact

with fat, spices, vinegar and other strongly seasoned and coloured

foodstuffs. Avoid contact with citric acid.

2. Operation

Activating the scales:

Place the scales on an even and firm surface. The scales make use of highly sensitive

sensor buttons (Sensor Touch). To activate the scales touch the SS | -button on the

bottom right of the display. The figures “8888” will first appear on the display. After the

scales have stabilised, “0 g” or “0: 00 lboz” will appear depending on the settings. The

scales are now ready for weighing.

Please note: If, after activating the scales, a weight-value is displayed, touch the SEC |

TARE -button to set the scales to zero.

Chan ging the unit of weight:

By touching the MIN | G/LB -button you can change the country-specific unit of weight

(g = gram / lboz = pound ounce). Please make sure that the scales are set to the unit of

weight relevant to you.

Zeroing-(Tare)-func tion:

By touching the SEC | TARE -button you can set the scales to “0 g”. Activate the scales

and place, for example, a bowl on the weighing platform, press the SEC | TARE -button

and thus set the scales to “0 g” again. This process can be repeated as often as you like

until the total capacity of the scales (5 kg) is reached. After removing the weighed item the

total weight will be displayed as a negative value.

Automatic / manua l deactivation of the scales:

If the displayed weight does not change within approx. 30 seconds, the backlight

deactivates and after approx. 3 minutes the scales automatically deactivate. By touching

the SS | -button for approx. 2 seconds you can also manually deactivate the scales

after using them, in order to conserve battery power.

3. Timer

Setting the timer:

Touch the SS | -button in order to activate the scales. Touch the SS | -button a

second time in order to get to timer mode. The letters “M” (minutes) und “S” (seconds) as

well as the indicator “00:00” (time setting) will appear on the display. If you have already

used the timer function, the previously specified time will appear. By simultaneously

pressing the MIN | G/LB and SEC | TARE buttons you can reset the time display to

“00:00”. Now by touching the MIN | G/LB -button you can set the desired minutes, and

by touching the SEC | TARE -button you can set the desired seconds. To set the values

more quickly, hold your finger down on the respective button. After entering the desired

time, touch the SS | -button again to confirm. The timer will count down and after

reaching the end a loud beep will sound for approx. 60 seconds. Stop the beeping by

touching a button. During countdown the timer function can, at any time, be stopped

and/or resumed by touching the SS | -button.

Stopwatch func tion:

Touch the SS | -button in order to activate the scales. Touch the SS | -button a

second time in order to get to timer mode. Touch the SS | -button a third time in order

to activate the stopwatch function. While it is running the stopwatch function can, at any

time, be stopped and/or resumed by touching the SS | -button. By simultaneously

touching the MIN | G/LB and SEC | TARE buttons you can reset the time indicator to

“00:00”.

Please note: If, within 30 seconds after starting the timer or the stopwatch, no further

activity takes place, the backlight will deactivate but the timer or stopwatch will remain

active.

4. Error messages

Lo = Display battery empty – please replace the batteries with the battery type

intended for your scales (2 x 1.5V AAA).

O-Ld = Overload indicator – max. capacity of scales 5kg has been exceeded.

Remove the load from the scales immediately, otherwise the load cell

could be damaged.

5. Technical Data

Weight-bearing capacity x division: Max. 5 kg x 1 g

Dimensions: 220 mm x 165 mm 16.5 mm

Batteries: 2 x 1.5V AAA

We reserve the right to make technical modifications in the course of further development.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ade KE 1424 Muriel Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info