Bedienungsanleitung Ade KE 1508 Sophia (Seite 4 von 12) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

641979

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Thank you for deciding to purchase this high-quality product from the WAAGEN-SCHMITT

Company. You have purchased a set of scales of the highest technical standard and proven quality.

Please read through this operating manual carefully before starting-up the scales for the first time,

and keep it in a safe place so that this information is available to you when you need it.

1. Start-up

Inserting the batteries:

Open the battery compartment cover on the underside of the scales and dispose of the battery

safety strips. Please pay attention to the correct polarity of the two CR2032 lithium batteries (+/-).

Safety information:

Please take care not to let any objects fall onto the scales, otherwise the

scales could be damaged.

Only clean the scales with a damp cloth. Do not use any solvents or

abrasive cleaning products. Do not immerse in water. All plastic parts of

the scales should be cleaned immediately after contact with fat, spices,

vinegar and other strongly seasoned and coloured foodstuffs. Avoid

contact with citric acid.

2. Operation

Activating the scales:

Place the scales on an even and firm surface. To switch the scales on, press down on the weighing

platform with a pressure of at least 500 grams (Press-On Technology). The figures “8888” will first

appear on the display. After the scales have stabilised, “0 g” or “0:00 lb oz” will appear depending

on the settings. The scales are now ready for weighing.

Please note: If, after activating the scales, a weight-value is displayed, touch the SEC|TARE button

to set the scales to zero.

Changing the unit of weight:

By touching the MIN|G/LB button you can change the country-specific unit of weight (g = gram / lb

oz = pound ounce). Please make sure that the scales are set to the weight-unit relevant to you.

Zeroing (tare) function:

By touching the SEC|TARE button you can set the scales to “0 g”. Activate the scales and place,

for example, a bowl on the weighing platform, press the SEC|TARE button and thus set the scales

to “0 g” again. This process can be repeated as often as you like until the total capacity of the

scales (5 kg) is reached. After removing the weighed item the total weight will be displayed as a

negative value.

Automatic deactivation of scales:

If the displayed weight does not change within approx. 3 minutes, the scales will automatically turn

off.

3. Timer

Setting the timer:

With the scale switched on, touch the S/S button in order to enter timer mode. The letters “M”

(minutes) und “S” (seconds) as well as the indicator “00:00” (time setting) will appear on the display.

If you have already used the timer function, the previously specified time will appear. By

simultaneously pressing the MIN|G/LB and SEC|TARE buttons you can reset the time display to

“00:00”. Now by touching the MIN|G/LB button you can set the desired minutes, and by touching

the SEC|TARE button you can set the desired seconds. To set the values more quickly,

hold your

finger down on the respective button. After entering the desired time, touch the S/S button again to

confirm. The timer will count down and after reaching the end a loud beep will sound for approx. 60

seconds. Stop the beeping by touching a button. During countdown the timer function can, at any

time, be stopped and/or resumed by touching the S/S button.

Stopwatch function:

Touch the S/S button in order to enter timer mode. Touch the S/S button once more in order to

activate the stopwatch function. While it is running the stopwatch function can, at any time, be

stopped and/or resumed by touching the S/S button. By simultaneously touching the MIN|G/LB and

SEC|TARE buttons you can reset the time indicator to “00:00”.

Please note: In order to return to weighing mode, please press and hold the SEC|TARE and the S/S

buttons simultaneously until the indicator “8888” appears on the display. After a few moments, the

scales are ready again and “0 g” appears on the display.

4. Error messages

Lo = Display battery empty – please replace the batteries with the battery type intended

for your scales (2 x CR2032).

O-Ld = Overload indicator – max. capacity of scales 5kg has been exceeded. Remove the

load from the scales immediately, otherwise the load cell could be damaged.

5. Technical Data

Weight-bearing capacity x division: Max. 5 kg x 1 g

Dimensions: 120 mm x 240 mm 17 mm

Batteries: 2 x CR2032 (included)

We reserve the right to make technical modifications in the course of further development.

6. Warranty

WAAGEN-SCHMITT warrants for a period of 3 years from the date of purchase that it will remedy any

defects due to faulty material or workmanship free of charge by repair or replacement. When making

a guarantee claim, please return the weighing scale together with the sales slip including the reason

of complaint to your dealer.

Note: The displayed value may be adversely affected under extreme electromagnetic influences, e.g.

when using a radio unit in the immediate vicinity of the device. Once the interference has been

rectified, the product can once again be used for its intended purpose. The device may have to be

switched-on again.

Statutory instructions on battery disposal

Batteries must not be disposed as household waste. The law requires that you, as consumer, return

the waste batteries either to public collection points in your town or village or to any outlet selling

batteries of the same kind.

Note:

Batteries are marked as follows:

Li = Battery contains Lithium

Al = Battery contains Alkali

Mn = Battery contains Manganese

CR (Li); AA (Al, Mn); AAA (Al, Mn

Ade KE 1508 Sophia Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info