Bedienungsanleitung Adler AD 1340 (Seite 4 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

799454

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

9. Keep warm function button / indicator

BEFORE FIRST USE

26. Do not use aggressive detergents to wash the kettle housing - they can damage the

kettle or remove the markings.

27. The device is not designed to work with external schedulers or separate remote

control system.

28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.

25. Descale your kettle regularly. Using kettle with heating element covered by scale may

cause damage.

29. Children aged 3 to 8 years old can enable and disable the device only when it is in its

normal position of use, they are supervised or instructed on the safe use and understand

the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean

or maintain.

DESCRIPTION OF THE DEVICE. ELECTRIC KETTLE AD1340

1. Lid 2. LCD display 3. Housing

4. Handle 5. Base 6. Mesh filter

24. Never use kettle without filter or with open cover (automatic shutdown will not work).

7. Power button ON/OFF 8. Temperature control buttons (+ / -)

BASIC OPERATION:

SINGLE WATER BOILING UP TO 100 ℃

Fill the kettle three times with water to the maximum level, boil and pour it. To remove any factory odor.

2. Place the base (5) on a stable, flat and heat-resistant surface.

4. Insert the power plug into the 220-240V ~ 50 / 60Hz power socket. Place the kettle on the base (5), you hear the "di" sound.

6. After the water boils, the kettle will automatically turn off, you will hear the "di-di" sound.

7. To turn off the kettle before the water finish boiling, lift it off the base (5) or press the power button (7)

8. You can start the kettle again after approximately 2 minutes from the last use.

9. When the device is not in use, the display (2) turn off lighting after 5 minutes.

ADVANCED OPERATION:

3. Remember to close the kettle with the lid (1) after filling, otherwise the kettle will not switch off automatically when the water boils.

1. Fill the kettle with water so that the water level is between the maximum and minimum levels on the water level indicator.

5. Press the power button (7), the display (2) will blink twice, indicating 100 ℃, then the heater will start heating the water, and the LCD

display (2) will show the current water temperature. The water temperature will rise until it boils, i.e. up to 100°C.

lid. Do not open the lid during boiling in kettle or immediately after boiling, because steam

coming out of lid can cause burns.

21. Move the kettle only by holding it by handle..

22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.

23. Never switch on kettle without water.

Put the kettle on the base (5), wait until you hear the “di" sound. Press the temperature control buttons (8), the display (2) will show the

temperature you choose 40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃) after that press the power button(7) to confirm the

temperature, the LCD display blinks three times remembering the setting of the selected temperature level. Then the display will show

the current water temperature inside the kettle. The kettle will stop boiling water when it reaches the selected temperature level of 40

℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), , you will hear the "di-di" sound.

PROTECTION DEVICES

CLEANING AND MAINTENANCE

Put the kettle on the base (5), wait until you hear the "di" sound. Press the keep warm function button (9) until the icon (KW) light on

the display (2). Press the temperature control buttons (8) until the display (2) will show the temperature you choose 40 ℃ (or 50 ℃ /

60 ℃ / 70 ℃ / 80 ℃ / 90 ℃) and blink three times remembering the setting of the selected temperature level, then press the power

button (7). The display will show the current water temperature inside the kettle. The kettle will stop boiling water when it reaches the

selected temperature level of 40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), you will hear a single "di" sound. Within 2 hours, the

kettle will heat the water cyclically, constantly displaying the selected temperature level to maintain. When the water temperature drops

by 5 ℃ in relation to the selected temperature level of 40 ℃ (or 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃), the device will turn on

automatically and heat it.

Note: Only during this procedure, the keep warm function will be active. After removing the kettle from the base, the keep warm

function settings will be reset.

The device is equipped with an automatic fuse against overheating, the fuse will trip when the kettle was used with insufficient water.

Always make sure that the volume of water in the appliance is above the minimum level. If the fuse turns on, turn off the kettle by

pressing the power button (7), then remove the plug from the power socket and allow the kettle to cool for 5-10 minutes. Then fill the

kettle with water and turn on the device that will operate normally.

SINGLE WATER BOILING TO THE SELECTED TEMPERATURE 40 ℃ OR 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃

KEEP WARM FUNCTION AT THE SELECTED TEMPERATURE 40 ℃ OR 50 ℃ / 60 ℃ / 70 ℃ / 80 ℃ / 90 ℃ /

Adler AD 1340 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info