Bedienungsanleitung Adler AD 1345 (Seite 4 von 92) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

799457

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

25. Descale your kettle regularly. Using kettle with heating element covered by scale may

cause damage.

6. Cover opening button

5. Base

11. MIN / MAX water level indicator

7. Power button (On / Off)

DEVICE DESCRIPTION ELECTRIC KETTLE AD1345

28. Do not wash the base of the kettle directly in the water, just wipe with a dry cloth.

4. Handle

21. Move the kettle only by holding it by handle..

10. Cooking indicator

9. Keep-warm function indicator

BEFORE FIRST USE

29. Children aged 3 to 8 years old can enable and disable the device only when it is in its

normal position of use, they are supervised or instructed on the safe use and understand

the resulting risks. Children aged 3 to 8 years old can not connect device, operate, clean or

maintain.

2. LED display

20. Always use caution when boiling water in the kettle. Do not touch the housing of kettle

or lid. Do not open the lid during boiling in kettle or immediately after boiling, because

steam coming out of lid can cause burns.

Fill the kettle three times with water to the maximum level, boil, and pour out. To remove any factory odor.

8. Temperature selection button

Only touch the buttons on the touch panel (12) with your fingertips, touching your fingernails may damage the touch panel!

BASIC OPERATION:

SINGLE WATER BOLING UP TO 100 °C

24. Never use kettle without filter or with open cover (automatic shutdown will not work).

12. Touch panel

26. Do not use aggressive detergents to wash the kettle housing - they can damage the

kettle or remove the markings.

27. The device is not designed to work with external schedulers or separate remote control

system.

23. Never switch on kettle without water.

1. Lid

3. Housing

22. Never fill kettle above MAX level and below MIN level. It may cause damage of kettle.

5. Press the button (7), the cooking indicator (10) will light up, then the heater will start heating the water and the LED display (2) will start

showing the current water temperature. The temperature of the water will increase until it boils, i.e. up to 100 ° C.

WITH THE TEMPERATURE KEEP-WARM FUNCTION

9. When the appliance is not in use, the LED display (2) will stay on showing the current water temperature.

ADVANCED OPERATION:

4. Insert the plug of the power cord into a 220-240V ~ 50-60Hz mains socket. Put the kettle on the base (5), you will hear the “di” sound,

and the LED display (2) will show the current water temperature.

BOILING WATER TO THE SELECTED TEMPERATURE 40 ℃ OR 55 ℃ / 80 ℃ / 90 ℃

6. After boiling the water, the kettle will automatically turn off, and you will hear a triple sound "di-di-di".

3. Remember to close the kettle with the lid (1) after filling, otherwise, the kettle will not turn off automatically after boiling water.

8. The kettle can be switched on again approximately 2 minutes after the last use.

2. Fill the kettle with water so that the water level is between the maximum and minimum level on the water level indicator inside the

kettle (11).

Put the kettle on the stand (5), and wait until you hear the "di" sound. Press the temperature selection button (8), the LED display (2) will

show the temperature of your choice (40 ℃ or 55 ℃ / 80 ℃ / 90 ℃) and blink four times storing the selected temperature level, the

temperature hold function indicator (9) will light up. Then the LCD display (2) will show the current water temperature inside the kettle.

The kettle will stop boiling water when it reaches the selected temperature level of 40 ℃ or 55 ℃ / 80 ℃ / 90 ℃, you will hear a triple

sound "di-di-di". After reaching the set temperature, the kettle will switch to the temperature maintenance mode and will periodically heat

the water when the water temperature drops by 5 ℃ in relation to the selected temperature level.

In order to interrupt the temperature maintenance function, remove the kettle from its base (5) or press the button (7). The keep-warm

function is maintained for max.24 hours from the last cooking.

7. If you want to turn off the kettle before the boiling water is finished, lift it from the base (5) or press the button (7).

If the water temperature in the kettle is higher than the desired temperature (more than 5 ℃), the indicator of the keep-warm function (9)

will flash until the water cools down to the pre-set temperature of 40 ℃ or 55 ℃ 80 ℃ / 90 ℃), being in the keep temperature mode all

the time.

1. Place the base (5) on a stable, flat, and heat-resistant surface.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 1345 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info