Bedienungsanleitung Adler AD 3056 (Seite 4 von 64) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

799626

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

device (RCD) in the power circuit, with residual current rating not more than 30 mA.

Contact professional electrician in this matter.

15.

Be careful, there can be hot steam

presence during use of the appliance.

This electrical appliance contains a heating function. Surfaces, also different than the

functional surfaces, can develop high temperatures. The equipment shall be touch only at

intended handles and gripping surfaces, and use heat protection like gloves or similar.

18. The device must cool down before you store it.

or meltable objects in the device.

destruction of the device.

Open device by holding the handle.

DESCRIPTION OF DEVICE

1. lid 2. Power indicator (red)

3. ready indicator (green) 4. Temperature control knob

BEFORE FIRST USE

1. Remove all cartons and labels from housing and from inside (between hotplates).

3. close and plug in, the power indicator lamp will light (2).

4. Keep the appliance running for few minutes to get ride of manufacturing odour. Device could emit some smoke during this time.

That’s normal.

5. Clean unit according chapter “Cleaning ”.

USING DEVICE

Prepare needed products.

1. Closed appliance plug in grounded socket - power indicator lamp will light (2).

2. Wait about 10 minutes. After this time device should reach required temperature - ready indicator lamp will light (3).

3. Fully open the device. Put on the bottom baking tray prepared product.

5. During operation the ready indicator lamp (3) will be turning on and off, that’s mean that thermostat keep appropriate temperature of

the hotplates.

6. Operation time is and depends on type of used ingredients and taste preference.

CAUTION: During operation from the cover of the device there can emit hot steam.

ATTENTION! Do not use metal utensils or sharp kitchen tools because they can damage the special non-stick coating heating plates.

8. Before cooking the next batch of products, close the device to the heating plate gets hot to the proper temperature. Illuminating of the

thermostat (3) indicates readiness to baking.

Accessible surface temperatures can be high when the appliance is operating.

Never touch the hot surfaces of the appliance.

16. Due to the high temperature you should be careful when removing the prepared

dishes, removing hot grease or other hot liquids.

17.

During or after use, please do not touch the baking tray or the hot area on the shell before

the temperature goes down.

20. The device is not designed to work with external schedulers or separate remote control

system.

21.

22.The power cord may not be placed above the device and it may not touch or be located

near hot surfaces. Do not place the device under a mains socket.

23. Do not move or carry the device during operation. After the operation it can be moved

only if it had enough time for cooling down.

24.

Apply a bit of edible oil or other plant fat to the trays,

approximately 5 to 15 minutes

Close the device

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 3056 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info