Bedienungsanleitung Adler AD 4078 (Seite 4 von 80) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

799913

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

17. Watch out for long hair, scarves, neckties hanging above the cup and operating

components of device.

27. If the blades are blocked, always disconnect the power cable plug from the power

socket before removing the blocking elements in the blender cup.

28. Do not move the appliance during operation.

1G - 3 programs: smoothie, ice crush, pulse 1H – blender body

16. In order to avoid injuries handle the blades carefully.

1A – cover 1B – jar lid 1C – blender jar

DEVICE OPERATION

21. Do not put any products other than food and liquids in the blender cup. Do not put hot

products in the cup.

23. Don't use aggressive detergents to clean the housing, as it may remove the

informational graphic symbols such as: scale, signs, safety marks, etc.

Before first use:

1. Remove all stickers from the housing, cup and cover of the blender.

19. Handle the blades with extreme care while disassembling accessories. The blades can

cause cuts.

2. Wash the device according to part CLEANING AND MAINTENANCE.

1D – blade 1E – drainage system 1F – speed adjustment knob

24. Do not start the empty mixing cup, without product inside.

DEVICE DESCRIPTION

18. For safety reasons use only original accessories and spare parts intended for particular

blender type, available at authorized service center.

22. The device is not suitable for whipping egg whites or kneading dough.

25. MAXIMUM PERIOD OF CONTINUOUS BLENDER OPERATION IS 3 MINUTES. After

3 minutes of continuous operation stop the device and wait couple of minutes before

restarting.

20. Change the accessories only when the device is switched off. Disconnect the device

from the power.

26. Do not pour hot liquids (above 60 degrees Celsius) into the food processor.

3. Place the blender jar (1C) on the body (1H). Blender jar doesn’t have a position a lock. You can place it in any position on the blender

body (1H) that you want.

5. Connect the power plug to the power outlet.

When processing different foods, you can use the rotating speed adjustment knob (1F) to choose first or second speed. Blender has

overheat protection, the unit can stop automatically after working for 2 minutes continuously.

2. Make sure the speed adjustment knob (1F) is set to the OFF position.

ICE CRUSH - if you want to crush ice, please rotate the speed adjustment knob to “ON” and press “ICE CRUSH” button. Blender will

6. Turn the blender on by moving speed adjustment knob (1F) to ON position. Program and knob lights will start flashing.

BLENDING WITH ADJUSTED SPEED

1. Put the blender main body (1H) on stable, level surface.

Blender operation:

SMOOTHIE - if you want to stir, please rotate the speed adjustment knob to ON and press “SMOOTHIE” button. Blender will work for 3

seconds then stop for 1.5 seconds, after working for 3 cycles, it will keep working for 45 seconds then will stop automatically.

4. Remove cover (1B) from the blender cup (1C), put in the ingredients to be mixed. In order to avoid overflow, the level of ingredients in

the jar should not exceed marked level on the jar.

BLENDING WITH PROGRAMS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 4078 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info