Bedienungsanleitung Adler AD 4620 (Seite 4 von 68) (Alle Sprachen)

797769

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

24. Observe the maximum uninterrupted operating time of the unit of 15 seconds. After

the continuous operating time of 15 seconds, wait 3 minutes before turning the unit back

on. Exceeding the operating time of the appliance and the absence of sufficient breaks

can lead to irreversible engine damage.

16. The blades are very sharp. The highest caution is offered. Before replacing the

mixers, unplug the power cord from the wall outlet.

18. Do not cover the ventilation openings in the housing during operation.

device (RCD) in the power circuit, with residual current rating not more than 30 mA.

Contact professional electrician in this matter.

15. The exchange of accessories may only be carried out with the device switched off.

19. For washing the case, do not use any heavy cleaning agents because they can be

used to remove graphical information symbols, e.g. Signs, warning photograms, etc.

21. Never touch with wet hands.

20. Never use the appliance for hot oil or grease (hot products).

17. Only use original accessories that are included in the scope of supply.

22. The appliance is not intended for crushing ice, bone and other hard products or for

grinding nuts and coffee.

23. During the mixing process, never place your hands or cutlery into the container.

25. When the appliance is dirty unplug it from the mains before cleaning.

26. Before first use, wash thoroughly and dry the appliance (see: Cleaning and

maintenance).

PRODUCT DESCRIPTION

1. BLENDER

a) ON/OFF switch, I speed b) ON/OFF switch, II speed c) motor part

d) blending shaft (removable)

2. CHOPPER

a) lid b) chopping blade c) chopper bowl d) anti-slip rubber ring

3. WHISK

a)gearbox b) whisk

4. BEAKER

USING THE DEVICE

The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing and

milkshakes.

1.Attach the blending shaft (1d) to the motor part (1c). Turn it until it is locked.

2.Place the blending shaft into the beaker (4). Then press the button I speed (1a) or II speed (1b).

During processing, always hold the blender with one hand and the beaker (4) in the other hand.

3. After use, unplug the device from a power socket. Remove blending shaft (1d) from the motor part (1c).

USING CHOPPER AND WHISK

Chopper: Chopper is perfectly suited for food, such as meat, cheese, onion, herbs, etc.

1.Always place the chopper bowl (2c) on the flat, dry surface. Place the chopping blade (2b) on the center pin of the chopper bowl

(2c).

2. Place the food in the chopper bowl (2c).

3. Cover the chopper bowl (2c) with the lid (2a). Press and turn it until it locks.

4. Attach the motor part (1c) to the chopper's lid (2a). Turn it until it locks.

5. Press desired speed button (1a) or (1b).

During processing, hold the blender with one hand and the chopper bowl with the other hand.

6. After use, unplug the device from a power socket. Detach motor part (1c) from the lid (2a). Open the lid (2a) and carefully take off the

chopping blade (2b).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 4620 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info