Bedienungsanleitung Adler AD 5032 (Seite 4 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

734443

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

when you rotate the iron, as in the tank, even when disconnected from the power

supply iron, may still be in hot water.

19. DO NOT allow for prolonged contact hot steam iron with fabric or flammable materials.

20. Be careful that the power cord does not touch the hot soleplate. Allow the iron to cool

completely before storage.

21. If you do not use iron, even for a short time, turn off the options of steam

22. Under no circumstances should be ironed clothes and fabrics that are on humans or

animals.

23. Never direct the steam to humans or pets.

24. Use self-cleaning function at least once a month.

25. Iron must be used at a stable even surface and this can only be disposed of.

26. Do not fill the water tank with chemicals, perfumes or descaling substance.

27. Do not fill the water tank over MAX level.

DESCRIPTION OF DEVICE

A. Spray nozzle B. The water inlet hole

C. Steam control switch D. Spray button

E. Steam burst button F. Power Cord

G. Rotary cable gland H. Heating / Thermostat indicator light

I. Temperature control knob - thermostat J. Self-clean button

K. Water tank L. Ceramic coated soleplate

M. Power indicator light N. Synthetic fabric – one drop

O. Silk – Wool fabric – two drops

INDICATOR LIGHT:

Plug in the iron, the power indicator light (M) turns on (always), when the thermostat works,

the heating indicator light (H) turns on, once the thermostat off work, the heating indicator light (H) turns off.

FILLING WITH WATER:

1. Set the steam control (C) to "0" (= no steam).

2. Open the water filling cover and turn the iron at a 45° angle to a flat, dry surface.

3. Fill the water tank with water to “MAX”.

4. Push the water filling cover to close it.

PREPARATION:

Sort the laundry to be ironed according to the international symbols on the garment label, or if this is missing, according to the type of

fabric.

Caution: If the fabric consists of various kinds of fibers, always select the lowest ironing temperature of the composition of those fibers.

Start ironing the garments requiring a low temperature. This reduces the waiting times (the iron takes less time to heat up than to cool

down) and eliminates the risk of scorching the fabric.

FIRST USE

When using the iron for the first time, you may notice a slight emission of smoke and hear some sounds made by the expanding

plastics. This is quite normal and it stops after a short time. We also recommend passing the iron over an ordinary cloth when using it

for the first time.

DRY IRONING (without steam) FUNCTION

1. Connect the power cord of the appliance to the wall outlet.

2. Turn the temperature control knob (I) to the desired temperature depending on the type of fabric you want to iron. Make

ENGLISH

GARMENT

LABEL

FABRIC

TYPE

THERMOSTAT

REGULATION

synthetic ·

low temperature

silk - wool ··

medium temperature

Cotton - linen ···

high temperature

Fabric not to be ironed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 5032 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info