Bedienungsanleitung Adler AD 7048 (Seite 5 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

800004

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

19. Do not aim the vacuum cleaner toward other people or animals.

20. The vacuum cleaner may be used only on dry surfaces.

21. Only use accessories designed for this appliance.

22. Use extra care when vacuuming stairs.

23. Do not block any vents.

24. Do not operate the vacuum cleaner without the filter.

25. Do not pull the vacuum cleaner by the hose.

26. Make sure that the power cord is not wedged by a door and does not get jammed.

When moving the vacuum cleaner please note the length of the power cord. Pulling the

vacuum cleaner suddenly when the cord is taut may damage it.

27.Vacuuming dust and residues of construction causes immediate loss of warranty. The

vacuum cleaner is designed for domestic use only.

28. The device is outfitted with a rechargeable battery. Do not throw into a fire, puncture,

crush or damage the battery.

Device Description: (Handheld vacuum cleaner)

1.Battery status 2. Dust Cup Release Button 3. Dust Cup 4. Wand Release Button 5.TUBE 6. Nozzle Release Button

7.Motorized Nozzle 8. Turbo Button 9. ON/OFF Button 10. Battery Pack Release Button 11. Battery Pack

12.Dust Cup empty Button 13. 2 in 1 Upholstery Brush 14. Long Crevice Tool 15. Charging Adaptor 16. Wall mount

·BATTERIE UNIT

Insert the batteries unit into the bottom of the machine and when it locked into the machine, you will hear the sound of connection. Pay

attention to the direction. (FIG.1)

·DUST CUP ASSEMBLY ASSEMBLED WITH THE MAIN PART

Firstly insert the lower plastic chip into the hole of the main part, then lock the upper cover with the upper lock of the main part. (FIG.2)

CONNECTION OF BRUSH

Insert the upper part into the lower connection of the power tube and can hear the sound of locking. (FIG.3)

CONNECTION WITH TUBE

Insert the upper ends into the main hole of the dust cup and can hear the locking sound (fig4)

Connection of power brush and main machine

Insert the upper part of the power brush into the main hole of the main machine (fig.5)

·Connection of accessory brushes with main machine

Insert the accessory brushes into the main hole of the main vacuum cleaners(FIG. 6,7)

·LOW SPEED, HIGH SPEED, OFF

To turn the device On/OFF press the On/OFF button (9)

Use the TURBO button (8) to shift the speed from low to high.

·Vacuum cleaner charging

Please use the designated adaptor to charge the vacuum cleaner

Plug the adaptor and when charge the light will glow in red when it is full, the light will turn blue

You can recharge the batteries unit alone or within the machine

Clean after each use

Press the upper button (2) to release the dust cup assembly unit (3), then press the lower button to release the dust cup lower cover. It

is recommended to clean the dust cup after using it every time.

Dust cup cleaning

a) Press the button to release the lower cover of the dust cup to empty the dust (FIG.9,10)

b) Take out the filter as fig.14 show and clean or change it. (FIG.11)

c) Clean the filter under running water and dry it under sunlight

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 7048 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info