Bedienungsanleitung Adler AD 7915 (Seite 4 von 54) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

725553

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

4. Carrying handle (on both sides) 5. Mesh filter 6. 2 plastic boxes with gel to frozen

22. The device can be used only with properly working ventilation.

7. Water tank 8. LED Touch control panel 9. Remote Control

10. Mesh filer’s frame

20. Do not move the device when the inner tank is filled with water.

21. Do not place any objects on the device.

DEVICE DESCRIPTION (Fig. A).

1. Air outlet opening 2. Water level indicator 3. Wheels

7. The TIMER button allows for programming the amount of time during which the device will operate before turning itself off

automatically (if the TIMER function is not used, the device will work until it is manually turned off). Time range 1 – 12 hours.

4. The SPEED button on the control panel allows you to change the speed of the blower unit. The following speeds can be selected:

HIGH (fast), MIDDLE (medium) and LOW (slow).

5. COOL button lowers the temperature of the air by running the water pump. Additionally, a set of two boxes is attached. Boxes are

filled in special gel that is able to frozen and un frozen and no need to open them.

2. Pull out the water tank (7) from the back of the machine and pour in the water (Fig. B). Be careful not to exceed the maximum level.

3. Turn on the device using the “ON/OFF ” button on the control panel (Fig. C).

USING THE DEVICE

2. If the device is not used for three or more months, take the batteries out of the remote control.

3. After long time operation, the mesh filter (5) and mesh filer’s frame (10) will be clogged with the dust, which will greatly affect the

machine’s performance of cooling. If long time no changing water, there may be mold and mildew. We suggest to clean the mesh

filter (5) and mesh filer’s frame (10) once every two weeks. The clean procedure is as below:

1. Clean with soft, dry cloth. Do not use chemical solvents because they can cause permanent damage or deformation of the device.

a) Unplug the device, remove the screw of the back housing and then take the frame and filter out.

4. Drain the water before storage by removing the drain plug at the bottom of the water tank. Then dry the device, mesh filter, mesh

filter's frame and housing to aviod the moisture damage.

6. Pressing the SWING button starts the oscillation of vertical slats that provide even distribution of cold air stream in range 120°.

Horizontal slats do not move automatically, so if necessary, manually adjust them to point up or down.

TECHNICAL DATA:

CLEANING AND MAINTENANCE

Tank capacity:7 liters Water Consumption: 0,5 – 0,6 liter / hour

A noticeable reduction in the temperature of the outlet air occurs after putting into the water tank plastic containers attached to the

product previously frozen in the freezer. It is recommended to fill the tank with cold tap water.

b) Wash the filter in a mild detergent and warm water solution, then rinse in clean water.

c) Wash the mesh filer with flowing clean water. Use a soft brush for cleaning.

8. The MODE button allows for changing the fan mode. In addition to the normal mode, you can select “NATURE” and “SLEEP.” The

NATURE mode mimics the natural wind action by repeating the fan speed sequence: middle speed (12 seconds) -> low speed (6

second) -> high speed (3 seconds) -> middle speed (6 second) -> low speed (6 second). The „SLEEP” mode operated in repeating

the fan speed sequence: middle speed (6 seconds) -> low speed (3 seconds).

1. Place the unit on a dry, flat surface and connect to the power supply.

Power: 65 W Power Max: 350 W

To use them, put them on 24 hours inside the freezer. Then put one or both of ice boxes into water tank (7). To blow the cool air, the

device must be filled with water. When the device is operating, periodically check the water level to see whether to add water.

Power source:220-240 V ~50 Hz

9. The button on remote control (9) is same as the control panel (8). Don’t put the stuff in the front of the remote control receivers.

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste

bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may

effect the environment. Do not dispose this appliance in the common waste bin.

DEUTSCH

1. Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen

Hinweise beachten. Der Produzent trägt keine Verantwortung für Schäden, die aufgrund

Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen

geändert.

ALLGEMEINE SICHERHEITSVORSCHRIFTEN

LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT

DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF

only to power outlet with ground circuit.

Low voltage directive (LVD)

Device is compliant with EU directives:

Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

Device is made in class I of insulation and has to be connected

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 7915 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info