Bedienungsanleitung Adler AD 8084 (Seite 4 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

800068

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

17. WARNING: Be careful that the products stored inside do not cover the vent.

18. Use the refrigerator in an upright position only.

19. Do not expose the refrigerator to direct sunlight, rain, snow, excessive moisture, etc..

20. Exercise particular caution when transporting the switched-on device in a car. Protect

against falling while driving.

21. WARNING: Keep space around the ventilation openings. Covering them will reduce the

cooling capacity and may damage the refrigerator.

23. Only ready-made (wrapped) articles may be stored in the refrigerator.

24. Prevent the appliance from being upside down. Don't drop or shock it.

25. Store food in original packaging or containers intended for this purpose.

DEVICE DESCRIPTION:

1A. Control panel 1B. Fan 1C. Car power cable

1D. Power supply cable for the home electrical installation

2B. Voltage switch – DC (12V ) / switching off (OFF) / AC (220-240V~)

2C. Car power socket 12V

22. Never connect the power cord to both the cigarette lighter and the electricity supply to

the refrigerator at the same time.

2A. Mode switch - heating (HOT) / switching off (OFF) / cooling (COLD)

current not exceeding 30 mA. A specialist electrician should be consulted in this regard.

15. Only original assembly parts and power cables supplied by the manufacturer in the set

with the device should be used.

16.Do not overload the refrigerator. The cover must close freely.

c) Insert the other end of the cable with the plug (1D) into the electric socket.

2. Device operation:

USING THE APPLIANCE

With 12V DC power supply:

d) Set the mode switch (2A) to: “HOT" when you want to heat the chamber or "COLD" to cool the chamber.

AC: Heating mode 38W / Cooling mode 42W

b) Set the voltage switch (2B) to AC.

WARNING: Don't switch the mode switch (2A) abruptly. Switch the function after 30 minutes of being on position: OFF.

2D. 220-240V~ power socket

The power consumption on each setting is as below:

With AC220-240V power supply:

a) Plug in the connector to the AC slot (2D).

Cleaning and Maintenance

NOTE: DO NOT PUT ANY FOREIGN OBJECTS INTO THE FAN TO CLEAN IT.

a) Insert the other end of the cable with the plug (1C) into the cigarette lighter socket.

c) Plug in the connector to the DC slot (2C).

d) Set the mode switch (2A) to: “HOT" when you want to heat the chamber or "COLD" to cool the chamber.

The power consumption on each setting is as below:

3. After finishing operation, set the mode switch (2A) and voltage switch (2B) to "OFF" and disconnect the wires.

1. Before cleaning make sure that the device is not connected to the power source.

b) Set the voltage switch (2B) to DC.

3A. Mini fridge chamber with aluminum cavity 3B. Shelf 3C. Mini basket 3D. Handle

2. The cleaning process is restricted to using a damp cloth with a little of washing up liquid on the inside and outside of the devices body.

DC: Heating mode 32W / Cooling mode 36W

1. Ensure that the power switch (2A) on the control panel (1A) of the refrigerator is in the OFF position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD 8084 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info