Bedienungsanleitung Adler AD2118 (Seite 4 von 72) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

799466

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

19. Keep the device out of the reach of children. Using the devices by children must be

supervised by adults.

23. Do not remove dust or foreign bodies from the inside of the device using sharp objects.

26. Hairsprays contain flammable materials. Do not apply them while using the device.

28. During operation, do not put the device on a wet surface or on a surface that is sensitive

to heat and high temperatures.

29. After use, turn off and unplug the unit. Wait until the device cools down before storing.

27. Do not use the device on people who are sleeping.

21. Do not wrap electric cable around the device.

17. The device has to be turned off after every use.

because water proximity presents risk, even if the device is turned off.

18. Do not leave device unattended when plugged in.

20. The power cord should not touch hot parts of the device and should not be located near

other heat sources.

22. Do not use the appliance in the bath.

24. Do not use outdoors or where aerosols are being used or where oxygen is being

administered.

25. Do not cover the appliance, it might cause the accumulation of heat in its interior and it

may cause damage or fire.

15. Do not allow the device to wet. If the device falls into water, immediately remove the

power plug from the power socket. If the device is powered, do not put hands in the water.

Have the device checked by the qualified electrician before using it again.

16. Do not touch the device with wet hands.

3. Turn on the knob to the desired temperature (4). Marking on the knob indicates temperatures:

0 – OFF, 1 - 140°C, 2 - 160°C, 3 - 180°C, 4 - 200°C.

4. LED diode (1) is lighted flashing while reaching established temperature. Indicator diode stops flashing when the curler reaches chosen

temperature.

DESCRIPTION OF THE DEVICE

31. The device is not intended to be operated with external timers or a separate remote

control system.

30. The heating elements reach high temperatures during operation. Do not touch hot parts

of the device with bare hands and do not allow it to come into contact with the scalp, as this

may cause burns.

4. Temperature adjustment knob 140°C - 200°C 5. Clamp 6.Lever

7. Cool touch tip 8. Foldable stand 9. Swivel cord

To achieve the best results in hair curling, use a device on washed, brushed and dry hair.

1. Before starting the electrical wire should be fully unrolled.

1. On/Off indicator (LED diode) 2. Handle 3. Ceramic coated barrel

2. Insert the plug into the power socket.

USING THE DEVICE

5. Wait 2-3 minutes to allow the appliance to reach its working temperature.

CAUTION: Avoid touching the head skin with the curling iron – this may cause burns.

6. Starting from the top of the head choose a small strand of hair and straighten it and comb.

7. Open the clamp (5) using the lever (6). Place the strand of hair so that the hair ends protrude slightly beyond the clamp. Close the clamp

(5).

8. Wind the hair strand around the barrel (3), starting at the hair tips and moving closer to the head.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler AD2118 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info