Bedienungsanleitung Adler CR 7743 (Seite 7 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

802400

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

19. Place the fan heater only on flat, stable surface.

20. Always turn the fan heater off and set the thermostat dial to minimum before removing

the power plug from the socket.

21. Never use the fan heater in high humidity rooms – bathroom, shower room, swimming

pools etc. The humidity can cause short circuit, and effect in damaging the device.

22. The operating fan heater needs to be under supervision and in sight all the time. If you

are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is

not used, the power plug has to be removed from the power outlet.

23. Do not connect the fan heater to the automatic switching device, for example

temperature controlling device or time switch.

24. Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should

be kept at least one meter from the fan heater.

25. Do not cover the device or put any objects on it while it is operating. Do not use the

device to dry clothes.

26. The power cord should not be placed above the fan heater, and it should not touch or

be placed near hot surfaces of the fan heater. Do not place the fan heater directly under

the power outlet.

27. The heating surfaces can heat to a temperature of 60 °C or higher. The fan heater

should be in a place that children and animals do not have access to.

28. The device is not intended to be installed or used in vehicles.

29. Some parts inside the device can be hot or cause sparking. Do not use the fan heater in

places, where gasoline, paints or other flammable materials are used or stored.

30. Do not use this heater in the immediate vicinity of a bathtub, shower or swimming pool

31. Do not use this heater if it has been dropped

32. Do not use if there are visible signs of damage to the heater

33. Use the heater on a level and stable surface or attach it to the wall, if provided for by the

manufacturer

WARNING: Do not use this heater in small rooms where there are people who are unable to

leave them by themselves, unless constant supervision is ensured.

WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable materials at

least 1 m away from the heater air outlet.

BEFORE FIRST USE

1. Place the device on even, flat surface. Position it a minimum 1 meter distance from the air inlet (3) and air outlet (4) to allow a good

airflow circulation. The device should not be placed underneath a power outlet. Plug in the device to suitable socket.

2. When the heater is turned on for the first time, it may release a slight, harmless odor. This odor is a normal occurrence caused by the

initial heating of the internal heating elements and should not occur again.

DESCRIPTION OF THE DEVICE: CERAMIC FAN HEATER

1. Thermostat knob

2. Heating power knob

3.Air inlet

4. Air outlet

5.Handle

USING THE DEVICE

To switch on the device turn the heating power knob (2) from position zero (0) to position one (I):

I – means the fan is switched on, unheated air flow is available.

1) Turn the thermostat knob (1) in a clockwise direction until it reaches the maximum setting.

2) Set up required heating power level:

II – means first heating power level 1000W,

III - means first heating power level 2400W.

3) When the room has reached the required temperature turn the thermostat knob (1) in an counterclockwise direction up to the point

where the device switches off and not beyond. The temperature fixed in this way will be automatically controlled and kept at a

constant .

4) The temperature of heating can be adjusted on each heating power level by using the thermostat knob (1) by rotation between MIN (-)

and MAX (+) according to your requirements.

5) To switch off the device turn the heating power knob (2) to position zero.

The device is protected against the overheating by the means of a thermal switch, which can power it off for a while. If this happens,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler CR 7743 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info