Bedienungsanleitung Adler CR 7745 (Seite 7 von 120) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

802401

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

19. Place the fan heater only on flat, stable surface

20. Always turn the fan heater off and set the thermostat dial to minimum before removin

the power plug from the socket.

21. Never use the fan heater in high humidity rooms – bathroom, shower room, swimming

pools etc. The humidity can cause short circuit, and effect in damaging the device.

22. The operating fan heater needs to be under supervision and in sight all the time. If you

are leaving the room with the fan heater, always turn the fan heater off. If the fan heater is

not used, the power plug has to be removed from the power outlet.

23. Do not connect the fan heater to the automatic switching device, for example

temperature controlling device or time switch.

24. Flammable materials, for example furniture, bedclothes, paper, clothes, curtains should

be kept at least one meter from the fan heater.

25. Do not cover the device or put any objects on it while it is operating. Do not use the

device to dry clothes.

26. The power cord should not be placed above the fan heater, and it should not touch or

be placed near hot surfaces of the fan heater. Do not place the fan heater directly under

the power outlet.

27. The heating surfaces can heat to a temperature of 60 °C or higher. The fan heater

should be in a place that children and animals do not have access to.

28. The device is not intended to be installed or used in vehicles.

29. Some parts inside the device can be hot or cause sparking. Do not use the fan heater in

places, where gasoline, paints or other flammable materials are used or stored.

30. Do not use this heater in the immediate vicinity of a bathtub, shower or swimming pool

31. Do not use this heater if it has been dropped

32. Do not use if there are visible signs of damage to the heater.

33. Use the heater on a level and stable surface or attach it to the wall, if provided for by the

manufacturer

WARNING: Do not use this heater in small rooms where there are people who are

unable to leave them by themselves, unless constant supervision is ensured.

WARNING: To reduce the risk of fire, keep textiles, curtains or other flammable

materials at least 1 m away from the heater air outlet.

BEFORE FIRST USE:

1. After removing the packaging, make sure that the device is in good condition.

2. The packaging materials may contain plastic, nails etc., which may be hazardous and therefore should not be left within the reach of

children.

3..This device should only be placed on a firm level surface and a minimum 100cm distance from walls or any other objects. It is a way to

optimize air flow, avoid placing the device in corners and small spaces.

WARNING: Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the device may overheat and become a fire risk.

Product description: fan heater CR7745

1. Control panel 2. Display panel 3. Air outlet grid 4. Base

5. Handle 6. Air inlet grid (on the back) 7. Pitch angle fixing 8. Power switch

9. Remote control

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adler CR 7745 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info