Bedienungsanleitung Adobe Handleiding Adobe Audition 3.0 (Seite 42 von 294) (Englisch)

56102

Zoom out

Zoom in

Vorherige Seite

1/294

Nächste Seite

ADOBE AUDITION 3.0

User Guide

Show Boundary Lines Displays boundary lines in the waveform display. Boundary lines are the horizontal lines that

visually indicate where the waveform’s amplitude approaches or exceeds the clipping level. The value in the Display

Lines At option specifies the amplitude at which the boundary lines appear.

Peak Files Specifies options for peak (.pk) files, in which Adobe Audition stores information about how to display

WAV files. Peak files make file opening almost instantaneous by greatly reducing the time it takes to draw the

waveform (especially with larger files).

• Peaks Cache Determines the number of samples per block to use when storing peak files. Larger values reduce

the RAM requirement for large files at the expense of slightly slower drawing at some zoom levels. If RAM is an issue

on your system, and you’re working with very large files (several hundred megabytes or more in size), consider

increasing the Peaks Cache to 1024 or even 1536 or 2048.

• Save Peak Cache Files Saves peak (.pk) files in the same folder as all WAV files. You can safely delete peak files or

deselect this option; however, without peak cache files, larger audio files reopen more slowly.

• Rebuild Wave Display Now Rescans the current file for sample amplitudes and redraws the waveform.

Show On-Clip Gain Control When There Is No Selection Range Always shows the on-clip control, so you can adjust

the amplitude of an entire file without first making a selection.

Data preferences

In the Preferences dialog box, click the Data tab to control how Adobe Audition handles audio data:

Auto-Convert All Data To 32-Bit Upon Opening Converts all 8-bit and 16-bit data to 32-bit when a file is opened. All

subsequent operations occur in the 32-bit realm.

Interpret 32-Bit PCM .wav Files As 16.8 Float Makes this version of Adobe Audition compatible with previous

versions when handling 32-bit PCM WAV files.

Dither Transform Results Enables dithering when processing effects such as FFT Filter or Amplify. Adobe Audition

does most processing using arithmetic greater than 16-bit, with the results converted back to 16-bit when complete.

During this conversion, dithering provides a higher dynamic range and cleaner results, with fewer distortions and

negative artifacts.

With this option enabled, you can approximate 24-bit performance with 16-bit data, because dithering increases

dynamic range by about 10 dB. If this option is disabled, audio data is truncated to 16-bit during reconversion, and

more subtle information is lost.

The drawback of dithering is that each operation adds a small amount of noise at the quietest volume levels.

However, the trade-off between dithering (adding noise) and truncating the data (creating artifacts and limiting

dynamic range) generally favors dithering, so it’s best to select this option.

Use Symmetric Dithering Enables symmetric dithering. In most cases, it’s best to select this option. If it is not

selected, a DC offset of one-half sample is added each time data is dithered. Symmetric dithering has just as many

samples added above zero as below zero. By contrast, nonsymmetric dithering just toggles between 0 and 1.

Sometimes in a final dither, this may be desired to reduce the bit range of the dither. However, both methods produce

identical audible results in every respect.

Smooth Delete And Cut Boundaries Over

Smooths cut and delete operations at the splicing point, preventing audible

clicks at these locations. Applies only the boundaries over the number of milliseconds specified in the edit box.

Smooth All Edit Boundaries By Crossfading Automatically applies a crossfade to the starting and ending boundaries

of the selection. This option smooths any abrupt transitions at these end points, thus preventing audible clicks when

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe Handleiding Adobe Audition 3.0 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info