Bedienungsanleitung Adobe Handleiding Adobe Audition 3.0 (Seite 256 von 294) (Englisch)

56102

256

Zoom out

Zoom in

Vorherige Seite

1/294

Nächste Seite

ADOBE AUDITION 3.0

User Guide

251

After you select an encoding option, you can set the desired quality. Just as with stereo WMA files, the higher quality

setting you select, the larger the file size, and vice versa.

Windows PCM (.wav, .bwf)

The Microsoft Windows PCM format supports both mono and stereo files at a variety of resolutions and sample

rates. It follows the RIFF (Resource Information File Format) specification and allows for extra user-information to

be embedded and saved with the file. The WAV format reproduces digital audio by using PCM (Pulse Code

Modulation)—PCM doesn’t require compression and is considered a lossless format.

You can include Broadcast Wave metadata in Windows PCM files. (See “Add audio file information” on page 253.)

The following options are available for 32-bit files; no options are available for 8- or 16-bit files:

32-bit Normalized Float (type 3) – Default The internal format for Adobe Audition and the standard floating point

format for type 3 .wav files. Values are normalized to the range of +/–1.0, and although values beyond this range are

saved, clipping may occur in some programs that read them back in. (Adobe Audition won’t clip audio but will

instead read the same value back if it’s beyond this range.)

4-byte PCM (type 1, 32-bit) Saves 32-bit audio as 32-bit integers, retaining 192 dB of dynamic range. However,

signal-to-noise ratio in saved files is 144.5 dB, reflecting the 32-bit float format that Adobe Audition uses internally.

24-bit Packed Int (type 1, 24-bit) Saves straight 24-bit integers so any data beyond the bounds is clipped. The .wav

BitsPerSample is set to 24 and BlockAlign is set to 3 bytes per channel.

24-bit Packed Int (type 1, 20-bit) Saves straight 24-bit integers so any data beyond the bounds is clipped. The .wav

BitsPerSample is set to 20 and BlockAlign is set to 3 bytes per channel. The extra 4 bits are actually the remaining

valid bits when saving, and they are used when reading (thus still giving 24-bit accuracy if those bits were actually

present when writing). Applications either fill those last 4 bits with zeros or with actual data; analog/digital

converters that generate 20 bits of valid data automatically set the remaining 4 bits to zero. Any type 1 format with

BlockAlign set to 3 bytes per channel is assumed to be packed integers, and a BitsPerSample value between 17 and

24 will read in all 24 bits and assume the remaining bits are either accurate or set to zero.

32-bit 24.0 Float (type 1, 24-bit) – Non-Standard Saves full 32-bit floats (ranging from +/–8million), but the .wav

BitsPerSample is set to 24 while BlockAlign is still set to 4 bytes per channel.

16.8 float – Obsolete/Compatibility The internal format used by Adobe Audition 1.0. Floating point values range

from +/–32768.0, but larger and smaller values are valid and aren’t clipped since the floating point exponent is saved

as well. The .wav BitsPerSample is set to 32 and BlockAlign is set to 4 bytes per channel.

Enable Dithering Dithers 32-bit files when they are saved to a PCM format (20-bit, 24-bit, or 32-bit). This option is

availableonlyfora32-bitfilethatyouselecttosavetoanonfloating-pointtypeformat.ItappliesaTriangulardither

with a depth of 1.0 and no noise shaping. If you wish to apply a noise-shaped dither, use the Edit > Convert Sample

Type command to dither the audio first, and then save the file without dithering enabled in the file format options.

PCM Raw Data (.pcm, .raw)

This format is simply the PCM dump of all data for the wave. No header information is contained in the file. For this

reason, you must select the sample rate, resolution, and number of channels upon opening the file.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe Handleiding Adobe Audition 3.0 Seite 256

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info