Bedienungsanleitung Adobe Illustrator CC - 2015 (Seite 521 von 568) (Englisch)

618522

521

Zoom out

Zoom in

Vorherige Seite

1/568

Nächste Seite

516

Automating tasks

Last updated 11/30/2015

Insert a stop

You can include stops in an action that let you perform a task that cannot be recorded (for example, using a painting

tool). After you complete the task, click the Play button in the Actions panel to complete the action.

You can also display a short message when the action reaches the stop as a reminder of what needs to be done before

continuing with the action. You can include a Continue button in the message box in case no other task needs to be

done.

1 Choose where to insert the stop by doing one of the following:

• Select an action’s name to insert a stop at the end of the action.

• Select a command to insert a stop after the command.

2 Choose Insert Stop from the Actions panel menu.

3 Type the message you want to appear.

4 If you want the option to continue the action without stopping, select Allow Continue.

5 Click OK.

You can insert a stop when recording an action or after it has been recorded.

Change settings when playing an action

By default, actions are completed using the values specified when they were originally recorded. If you want to change

the settings for a command within an action, you can insert a modal control. A modal control pauses an action so that

you can specify values in a dialog box or use a modal tool. (A modal tool requires pressing Enter or Return to apply its

effect—once you press Enter or Return, the action resumes its tasks.)

A modal control is indicated by a dialog box icon to the left of a command, action, or set in the Actions panel. A red

dialog box icon indicates an action or set in which some, but not all, commands are modal. You can’t set a modal

control in Button mode.

Do one of the following:

• To enable a modal control for a command within an action, click the box to the left of the command name. Click

again to disable the modal control.

• To enable or disable modal controls for all commands in an action, click the box to the left of the action name.

• To enable or disable modal controls for all actions in a set, click the box to the left of the set name.

Exclude commands from an action

You can exclude commands that you don’t want to play as part of a recorded action. You can’t exclude commands in

Button mode.

1 If necessary, expand the listing of commands in the action by clicking the triangle to the left of the action name in

the Actions panel.

2 Do one of the following:

• To exclude a single command, click to clear the check mark to the left of the command name. Click again to

include the command.

• To exclude or include all commands or actions in an action or set, click the check mark to the left of the action

or set name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe Illustrator CC - 2015 Seite 521

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe Illustrator CC - 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info