Bedienungsanleitung Adobe InCopy CC - 2014 (Seite 285 von 341) (Englisch)

618535

285

Zoom out

Zoom in

Vorherige Seite

1/341

Nächste Seite

280

Tables

Last updated 6/15/2014

If you want to apply a fill or stroke to every body cell in the table, and not just alternating patterns, you can still use the

alternating stroke and fill settings to create such non-alternating patterns. To create such an effect, specify 0 for Next in

the second pattern.

Before (left) and after (right) alternating fills in a table

Add alternating strokes to a table

1 With the insertion point in a cell, choose Table > Table Options > Alternating Row Strokes or Alternating Column

Strokes.

2 For Alternating Pattern, select the type of pattern you want to use. Select Custom if you want to specify a pattern;

for example, one column with a thick black line followed by three columns with thin yellow lines.

3 Under Alternating, specify the fill options for both the first pattern and the next pattern. For example, you may want

to add a solid stroke to the first column and a Thick - Thin line to the next column, so that they alternate. Specify 0

for Next if you want the strokes to affect every row or column.

Note: In tables that span multiple frames, alternating strokes and fills for rows do not restart at the beginning of

additional frames in the story. (See

Break tables across frames.)

4 Select Preserve Local Formatting if you want formatted strokes previously applied to the table to remain in effect.

5 For Skip First and Skip Last, specify the number of rows or columns at the beginning and end of the table in which

you do not want stroke attributes to appear, and then click OK.

Add alternating fills to a table

1 With the insertion point in a cell, choose Table > Table Options > Alternating Fills.

2 For Alternating Pattern, select the type of pattern you want to use. Select Custom if you want to specify a pattern,

such as one row shaded in gray followed by three rows shaded in yellow.

3 Under Alternating, specify the fill options for both the first pattern and the subsequent pattern. For example, if you

selected Every Second Column for Alternating Pattern, you may want to shade the first two columns in a gray tint

and leave the next two columns blank. Specify 0 for Next if you want the fill to apply to every row.

4 Select Preserve Local Formatting if you want previously formatted fills applied to the table to remain in effect.

5 For Skip First and Skip Last, specify the number of rows or columns at the beginning and end of the table in which

you do not want fill attributes to appear, and then click OK.

Turn off alternating strokes and fills in a table

1 Place the insertion point in the table.

2 Choose Table > Table Options > Alternating Row Strokes, Alternating Column Strokes, or Alternating Fills.

3 For Alternating Pattern, choose None, and then click OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe InCopy CC - 2014 Seite 285

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe InCopy CC - 2014

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info