Bedienungsanleitung Adobe InDesign CC - 2014 (Seite 563 von 633) (Englisch)

618530

563

Zoom out

Zoom in

Vorherige Seite

1/633

Nächste Seite

556

Printing

Last updated 10/4/2014

When printing, you can override the default location for bleed marks in the Bleed And Slug area of the Marks And

Bleed area.

Files saved in PostScript file format allow capable post-processing programs to implement their own variable bleed.

1 Choose File > Print.

2 Click Marks And Bleed on the left side of the Print dialog box.

3 Select either All Printer’s Marks or individual marks.

4 To override bleed settings in the Document Setup dialog box, uncheck Use Document Bleed Settings and enter

values from 0 to 6 inches (or equivalents) for Top, Bottom, Left, and Right (for single-sided documents), or Top,

Bottom, Inside, and Outside (for double-sided documents with facing pages). To extend the offset evenly on all sides

of the page, click the Make All Settings The Same icon

5 Click Include Slug Area to print objects using the slug area defined in the Document Setup dialog box.

You can preview the bleed and slug areas before printing by clicking the Bleed Preview Mode or the Slug Preview

Mode icon at the bottom of the Toolbox. (These may be hidden by the Preview Mode icon .)

Marks and Bleed options

The Marks And Bleed area includes the following options:

All Printer’s Marks Selects all printer’s marks including crop marks, bleed marks, registration marks, color bars, and

page information.

Crop Marks Adds fine (hairline) horizontal and vertical rules that define where the page should be trimmed. Crop

marks can also help register (align) one color separation to another. By using together with bleed marks, you can select

overlapped marks.

Bleed Marks Adds fine (hairline) rules that define the amount of extra area to image outside the defined page size.

Registration Marks Adds small “targets” outside the page area for aligning the different separations in a color

document.

Color Bars Adds small squares of color representing the CMYK inks and tints of gray (in 10% increments). Your service

provider uses these marks to adjust ink density on the printing press.

Page Information Prints the filename, page number, current date and time, and color separation name in 6-point

Helvetica in the lower-left corner of each sheet of paper or film. The Page Information option requires 0.5 inches

(13mm) along the horizontal edge.

Please note that page information is printed in GothicBBB-Medium-83pv-RKSJ-H (Medium Gothic) font.

Type Lets you choose default printer’s marks or custom marks (for Japanese pages, for example). You can create custom

printer’s marks or use custom marks created by another company.

Weight Displays possible weights for crop and bleed mark lines.

Offset Specifies how far from the edge of the page (not the bleed) InDesign will draw printer’s marks. By default,

InDesign draws printer’s marks 6 points from the edge of the page. To avoid drawing printer’s marks on a bleed, be sure

to enter an Offset value greater than the Bleed value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe InDesign CC - 2014 Seite 563

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe InDesign CC - 2014

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info