Bedienungsanleitung Adobe InDesign CC - 2014 (Seite 614 von 633) (Englisch)

618530

614

Zoom out

Zoom in

Vorherige Seite

1/633

Nächste Seite

607

Printing

Last updated 10/4/2014

Checking separation and document settings

The Summary area of the Print dialog box displays a summary of color management information, printer’s marks

dimensions, and bleeds for the document. The section also indicates whether trapping has been enabled.

You can also perform a quality check before printing or handing off the document to a service provider.

Proofing color separations

Create a hard proof to verify that colors will print on the correct separations, or a soft proof to preview how your

document’s colors will look when reproduced on a particular output device.

Note: While no proof will give you an exact representation of your final output, you can greatly improve its accuracy by

calibrating all the devices you use to create a document (such as scanners, monitors, and printers). If the devices are

calibrated, the color management system can help you get predictable and consistent color.

The hard proof represents your expectation of the way the final separations will appear, and helps the service provider

to verify that the output is correct. Be sure to print proofs on a PostScript printer; you cannot reliably proof color

separations printed from a non-PostScript printer.

For assurance that the file will print correctly, consider saving the separations as a PostScript file, converting the

PostScript file to Acrobat 8 PDF using Acrobat Distiller, and then viewing the PDF document in Acrobat. By viewing

the PDF document in Acrobat, you can inspect high-quality PostScript output on-screen at a high level of detail.

Producing in-RIP separations

To produce in-RIP separations, you need the following software and hardware:

• A PPD file that supports in-RIP separations.

• Any PostScript 3 output device, or a PostScript Level 2 device whose RIP supports in-RIP separations. If the

document contains duotones from Photoshop 5.0 or later, a PostScript 3 device is required to generate in-RIP

separations.

Note: Depending on the prepress software available, a service provider may be able to perform such prepress activities as

trapping, imposition, separating, and OPI replacement at the output device’s RIP. Therefore, your service provider may

prefer to receive a composite PostScript file of the document optimized for in-RIP separations, rather than a preseparated

PostScript file.

Print or save separations

1 At the top of the Print dialog box, choose a preset in the Print Preset menu, if one with the appropriate separation

settings exists.

2 Do one of the following:

• To print to an output device, choose the device in the Printer menu.

• To print to a file, choose PostScript® File in the Printer menu. Then choose a PPD that supports the output device.

3 Click General, and specify the pages to separate.

4 Click Output, and do one of the following:

• To print to an output device, choose Separations to create the separations in InDesign.

• To print to a file, choose either Separations, or In-RIP Separations to save separation settings in a composite

PostScript file for processing in the RIP.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe InDesign CC - 2014 Seite 614

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe InDesign CC - 2014

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info