618528
624
Zoom out
Zoom in
Vorherige Seite
1/649
Nächste Seite
617
Printing
Last updated 11/30/2015
The Black Color setting is useful when you must compensate for extreme dot gain (as when using low-grade paper
stock). These situations cause black percentages lower than 100% to print as solid areas. By screening back blacks or
rich blacks (using tints of solid black) and decreasing the Black Color setting from its default of 100%, you can
compensate for dot gain and ensure that the trapping engine will apply the proper trap width and placement to black
objects.
When a color reaches the Black Color value, the Black trap width value is applied to all abutting colors, and keepaway
traps are applied to rich black areas using the Black trap width value.
If support screens extend all the way to the edge of a black area, any misregistration causes the edges of support screens
to become visible, creating an unwanted halo or distorting the edges of objects. The trapping engine uses a keepaway,
or a holdback, for rich blacks to keep support screens a specified distance away from edges of reversed-out or light
elements in the foreground, so that the light elements retain their sharpness. You control the distance of support screens
from the edges of black areas by specifying the Black trap width value.
Note: If the element you’re trapping is a thin element, such as a black keyline around graphics, the trapping engine overrides
the Black trap width setting and limits the trap to half the width of the thin element.
Set the trap width for colors next to black
1 Choose New Preset in the panel menu to create a preset, or double-click a preset to edit it.
2 In the Trap Width section, for Black, enter a distance (in points) for how far you want other colors to spread into
black, or for how far you want support screens choked back under black. Typically, the Black trap width is set to be
1.5 to 2 times the value of the Default trap width.
3 For Black Color and Black Density, set values.
Note: To use black trapping features, a color area must use an ink with a neutral density greater than or equal to the Black
Density, and the ink must occur in percentages greater than or equal to the Black Color.
Printing books with conflicting trap presets
You can apply one trap preset to one sheet of output, such as one page. Normally this is not a concern. However, if you
print multiple documents in a book, and each document or page has a different trap preset, InDesign can resolve some
trap preset conflicts by synchronizing presets among documents:
If documents in a book use different trap presets with the same name, InDesign assigns the trap preset used in the
master document, provided youve selected the Trap Preset option in the Synchronize Options dialog box.
The synchronizing feature makes all the master documents presets available to the other documents in the book,
but does not assign them; you have to assign trap presets in each document, or use the [Default] trap preset. The
presets appear in the Trap Preset menu of the documents Assign Trap Presets dialog box.
Note: If different trap presets are applied to pages in a spread, InDesign honors each trap preset.
More Help topics
About InDesign styles and presets
Trapping imported bitmap images
Synchronize book documents
624

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Adobe InDesign CC - 2015 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Adobe InDesign CC - 2015

Adobe InDesign CC - 2015 Bedienungsanleitung - Deutsch - 749 seiten

Adobe InDesign CC - 2015 Bedienungsanleitung - Holländisch - 762 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info