Bedienungsanleitung Adobe Premiere Pro CC - 2013 (Seite 568 von 575) (Englisch)

618548

568

Zoom out

Zoom in

Vorherige Seite

1/575

Nächste Seite

DV 23.976i

To the top

Note:

Abort After Dropped Frames

Report Dropped Frames

Render Audio Before Export

Specifies DV 24p (24 progressive) or 24pA (24 progressive advanced), which uses a timebase of 23.976 and interlaced fields

(that become progressively scanned frames using a pulldown scheme).

5. Select a 24p conversion method.

6. Close other programs that might be running on your computer.

Your computer is now ready to export your sequence directly to tape.

Export a sequence to tape with device control

Before you export to videotape using device control, make sure that both the computer and the camera or deck are set up properly, as you would

when capturing video with device control (see Set up device control).

If you’re using equipment that comes with its own software plug-in for use with Premiere Pro, it may provide device control options different from

those described here, and in different locations. (For information, see the documentation for the device.)

Before you can export a sequence to an HDV device, you must first transcode it to HDV format. Premiere Pro does this transcoding automatically

just before exporting the sequence to an HDV device.

You can export to tape on an HDV device in Windows only, and only with device control over FireWire.

1. Make sure that your video recording device is on and that the correct tape is in the device. If necessary, locate and note the timecode for

the location at which you want to begin recording. (This requires a tape recorded with timecode. See Stripe tape or replace timecode.)

2. Activate the sequence you want to export, and position the work area bar over the section of the sequence you want to export.

To place the work area bar over the whole section of the sequence that is visible in the Timeline panel double-click in the space just

under the time ruler. To first view the whole sequence, press the backslash (\) key.

3. Choose File > Export > Export To Tape.

4. To let Premiere Pro control your deck, select Activate Recording Device and do any of the following:

To specify a particular frame on the tape to start recording, select Assemble At Timecode and type the In point. If you don’t select this

option, recording begins at the current tape location.

To synchronize a device’s timecode with the recording start time, select Delay Movie Start and type the numbers of frames that you want

to delay the movie. Some devices need a delay between the time they receive the record command and the time the movie starts

playing from the computer.

To have Premiere Pro roll the tape before the specified start time so that the deck can attain a constant speed, select Preroll and type

the number of frames you want the tape to play before recording begins. For many decks, 150 frames is sufficient.

5. In the Options section, select any of the following options:

Ends export automatically if a specified number of frames is not exported successfully. Specify the number in

the box.

Generates a text report alerting you to dropped frames.

Prevents sequences containing complex audio from causing dropped frames during export.

571

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe Premiere Pro CC - 2013 Seite 568

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe Premiere Pro CC - 2013

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info