Bedienungsanleitung Adobe Premiere Pro CC - 2015 (Seite 474 von 519) (Englisch)

618546

474

Zoom out

Zoom in

Vorherige Seite

1/519

Nächste Seite

468

Effects and transitions

Last updated 11/30/2015

2 In the Effects And Sends panel, click one of the downward-pointing triangles in the Effect Selection section, and

select the name of an effect.

3 Double-click the effect name.

The VST editor panel opens. This panel can be docked or grouped like any other panel.

4 In the VST editor window, specify the options.

Note: The option controls for VST plug-in effects are also available at the bottom of the Effects And Sends panel.

Select a preset for a VST effect

Right-click (Windows) or Control-click (Mac OS) the effect name in the Effects And Sends panel of the Audio

Mixer, and choose a preset listed at the bottom of the menu.

Note: If an effect doesn’t support presets, Default is the only choice. Default resets all option values for the effect.

More Help topics

Route tracks with sends

Work with submixes

The rolling shutter repair effect

A common problem for DSLR and other CMOS sensor-based cameras is that they typically have a lag time between

scanning lines of video. Due to the time lag between scans, not all parts of the image are recorded at exactly the same

time, causing rolling shutter distortions. These distotions can occur when the camera or subject is moving.

The Rolling Shutter Repair effect in Premiere Pro can be used to remove these distortion artifacts.

After applying the effect, the following properties are available:

Rolling Shutter Rate: Specifies the percentage of the frame rate which is the scan time. DSLRs seem are in the 50-70%

range, and iPhone is close to 100%. Adjust the Rolling Shutter Rate until distorted lines become vertical.

Scan Direction: Specifies the direction that the rolling shutter scan takes place. Most cameras scan the sensor top-to-

bottom. With a smart phone, you can operate a camera upside down or rotated, which would require a different scan

direction.

Advanced section:

Method: Indicates if optical-flow analysis and pixel-motion retiming will be used to generate the unwarped frames

(Pixel Motion), or if a sparse point-tracking and warping method should be used (Warp).

Detailed Analysis: Performs a more detailed point-analysis in the warp. Available when using the Warp method.

Pixel Motion Detail: Specifies how detailed the optical-flow vector field computation should be. Available when using

the Pixel Motion method.

Note: Although the Warp Stabilizer effect has a rolling shutter repair effect within it, the standalone version has more

controls. There are also times when you want to repair a rolling shutter problem, but you do not need to stabilize the shot.

In this video by Todd Kopriva and video2brain, you'll see how easy it is to repair rolling shutter artifacts, which are

common in footage from DSLRs and mobile phone cameras, using the new Rolling Shutter Repair effect.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Adobe Premiere Pro CC - 2015 Seite 474

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Adobe Premiere Pro CC - 2015

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info