Bedienungsanleitung Aduro 1-1 (Seite 21 von 46) (Deutsch, Englisch, Dänisch, Französisch, Schwedisch)

632330

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

______________________________________________________________________ _________________________________________________________

1.4 Transportation

When taking your wood burning stove home, please ensure that it travels in an upright position. If you wish to lay it

flat, it is important that you remove all loose parts from the combustion chamber (cast iron grate and loose fireproof

tiles) and remove the ash drawer. Alternatively you could also fill the combustion chamber with excess packaging

so the parts are kept in place.

2.0 Mounting of soapstone

Aduro 1-1SK is mounted with a soapstone cover. To avoid

damages it is important to follow the following instructions:

The top stone lies on the wood burning stove at delivery

and is lifted off before placement. In the drawer lies six

soapstone sides, 12 dowels and 6 metal brackets, which

are also removed before placing.

The soapstone is mounted again when the stove is placed

at its final position. By mounting the soapstone you have

to use the enclosed 12 dowels and metal brackets.

1. Place carefully the first side stone on the dowels

on the bottomplate and place dowels in the two

holes at the top of the side stone. Then fix the

stones by fixing the dowels to the body of the

stove using the metal brackets (see illustration).

2. Repeat step 1 with the middle and last stone.

3. Repeat step 1-2 on the opposite side.

4. Place the top stone on the stove.

2.1 When smoke outlet at the back of the stove is

requested

If you choose to use the smoke outlet at the back of the

stove, it is important to mount the pipes before the

soapstone is mounted. Please remember to turn the cover

plate correct. Se item 3.2.

3.0 Installation of the wood burning stove

You are welcome to install your wood burning stove yourself – but we strongly recommend that you consult your

chimney sweep before you begin the installation. Your dealer can also provide you with installation advice. It is

important to ensure that all local rules and regulations, including ones relating to national and European standards,

are complied with when installing this device.

Please note: You may not begin to use the wood burning stove until it has been inspected and approved by your

local chimney sweep.

3.1 Position of the stove/distance requirements

The new wood burning stove must be installed in a suitable and physically possible position. You need to be sure

that the position complies with local regulations. Distance requirements will only apply if the wood burning stove is

to be placed close to flammable materials. See below.

If the stove is positioned against a brick wall or other non-flammable material, there is no minimum distance

requirement. To facilitate cleaning and for the best use of the convection air, we recommend that you leave a

distance of approximately 5–10 cm to the wall. The Aduro 1-1/1-1SK is built as a convection stove. This means that

air from the room circulates between the inner stove and the outer covering. As a result, the heated air is

distributed evenly throughout the room.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aduro 1-1 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Aduro 1-1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info