Bedienungsanleitung Aduro 11 eco (Seite 22 von 38) (Deutsch, Englisch, Dänisch, Französisch, Schwedisch)

711961

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

_______________________________________________________________________________________________________________________________

- 22 -

3.6 Secondary damper

The secondary damper on the door should always be open while the wood burning stove is in use. This damper

allows you to adjust the wood burning stove to the chimney draft and the heat output you require. In normal

circumstances, the wood burning stove should be working with this damper open between 60 % and 100 %. You

should never close the air intake so far that the flames are extinguished. There should always be visible flames in

order to achieve clean and efficient combustion.

3.7 Primary damper

When you add a new log, the primary air intake/damper should be opened until the fire is burning properly. In order

to utilize the fuel to the fullest extent, the embers should have burnt for so long that it is necessary to open the

primary air intake for approx. 2 minutes to get the new log to burn.

In order to reduce the risk of ash falling from the stove when the door is opened to add more fuel, it is a good idea

to open the primary air intake/damper for approx. 1 minute before the door is opened. This increases the draught

through the stove and reduces the risk that ash will drop on the floor.

Please note: if you overload the wood burning stove and burn more than approx. 2.5 kg wood/hour, there is a risk

that the lacquered surface of the stove will become discoloured and eventually fall off. The stove can be resurfaced,

but this is not covered by the manufacturer’s guarantee. In the same way, any other damage to the stove caused by

overloading will not be covered by the guarantee.

3.8 Aduro-tronic

The patent-applied Aduro-tronic is designed to operate the stove for you. All you have to do is put

dry wood in the stove, and activate the control system - Aduro-tronic does the rest, leaving you to

enjoy the flames and the benefits of efficient combustion. Aduro-tronic is a patent-applied

mechanical solution, which works without the use of electricity.

Please note: Use of dry wood of the right size is important to achieve optimum combustion.

3.8.1 How to operate Aduro-tronic

When lighting

When lighting a fire in the wood burning stove for the first time, the maximum amount of

primary air will be needed to light the fire. For that reason, the primary damper can be

kept “forcibly open”. This is done by pulling the primary damper forward as far as

possible and then fixing it with the Aduro Key (see illustration). When the stove is warm

and a layer of embers has been created on the bottom of the combustion chamber,

the Aduro-tronic can be set to the automatic position, i.e. the Aduro Key can be

removed.

Alternatively, you can leave the door ajar the first minutes during lighting the fire

(without the key).

When stoking

Each time fresh wood is put in the stove, a precise amount of primary air will be allowed in for the first few minutes.

What’s more important is that the primary air is not allowed in for too long. This is to ensure optimum combustion.

The Aduro-tronic control will ensure intake of primary air at the right tempo. The automatic is activated by pulling the

primary damper out each time fresh wood is put in the stove. The automatic closes then the primary air gradually.

Regulation of the Aduro-tronic control

The control is pre-set to allow primary air intake for the first 5 minutes. This setting has been used during testing at

the Danish Technological Institute using ‘standard’ sized logs and with optimum moisture content of 17-20%.

Standard size logs are approx. 30 cm long and 10 x 10 cm in thickness. A standard chimney was also used for

testing. In practice, such circumstances can differ, which is why the Aduro-tronic control can be adjusted to your

circumstances. If you want a slower intake of primary air: (e.g. for a slower flue draught, larger sized wood or for

longer intervals between stoking) Adjust the screw on the front of the control level using a small screwdriver to slow

closure rate. If the screw is turned to the right closing time is increased and if turned to the left closing time is

reduced.

3.9 Ventilation/fresh air supply

In order for the wood burning stove to function at optimum efficiency, air is needed for the combustion process.

There must be sufficient fresh air coming into the room containing the wood burning stove. In very well-insulated

houses, or houses with powerful cooker hoods and/or air conditioning systems, a vacuum can be created around

Aduro Key

Dansk | Deutsch | English | Francais | Svenska

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Aduro 11 eco Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info