Bedienungsanleitung AEG AB300 (Seite 3 von 8) (Englisch)

49525

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

AUG 05, 2002 3 of 8 PD99025-1

When the machine is first powered up, the A/M will carry out a self-functional testing for 5 seconds and

the Dual digit display will start to running until this testing complete. Then, it will sound with a long beep

as well as a “00” show on the display. The A/M goes to the standby mode.

Answering Machine Operation

1.Turn on and off the answering machine

Press and hold the ‘On/Off’ button by 2sec The answering machine is activated on when it is

originally in off mode. It will prompt ‘Answering

machine on, Announcement one’ and a short beep is

followed. The display will shows the number of

message being recorded.

Press the ‘On/OFF’ button again (During A/M at

standby mode). To select OGM2.

A short beep will be heard then prompt

‘Announcement two’. Switch to “answer only” mode.

Press again to switch back to ‘Answer and record

mode’. To select back to OGM1.

After a short beep, then prompt ‘Announcement one’.

Switch to answer and record mode, answer with

recorded OGM.

Press and hold the ‘On/Off’ button again (for 2sec) The answering machine is turn off. Prompt

‘Answering off’ and two short beep will be heard.

The display will shows two dash ‘- -‘.

Note: When the answering machine is powered on, the status of the DTAM should be defaulted as in

answer ON mode.

2. Set up the answering machine

2.1 OGM recording

Press and hold ‘OGM’ button for 2 seconds After a long beep, A/M start the OGM recording and

the display shows ‘ Or’ to indicate OGM recording.

Press ‘Stop’ button to end recording. A long beep to indicate stop recording then play the

OGM once and followed be a long beep. The display

shows ‘OP’ to indicate OGM Playback.

Press ‘OGM’ once. To play the announcement once again, similarly ‘OP’

is displaying on the 7-segment.

To recall the default OGM by press the ‘Delete’ key

during OGM playback

Default announcement will be play on the speaker.

Toggle OGM1 or OGM2 By press the ‘STOP’ key once, the A/M will prompt

‘Announcement two’ & display ‘o2’, To press ‘STOP’

key again, it will prompt ‘Announcement one’ &

display ‘o2’.

Note: Default OGM1 – such as ‘Sorry I can’t answer call now, please leave your message after the beep’,

Default OGM2 – such as ‘Please call later’.

The time duration of OGM recording should be with 2 seconds < duration < 2 min.

2.2 Set day and time, the default day and time is “Sunday, 12:00”

Press and hold the ‘Time’ button for 2 seconds

(Set day of week)

After a short beep, the A/M is ready to set the day of

week, then, prompt ‘ Please set day, pause, then

prompt current day. The symbol “CL” will display on

the 7-segment too.

Press ‘FF’ or ‘RW’ to select days Prompt at each selection.

Press ‘Time’ button to accept day setting and jump to

“hours setting”

Prompt ‘Please set time’, pause then prompt current

hour.

Press ‘FF’ or ‘RW’ to select hours Prompt at each selection.

Press ‘Time’ button to accept the hour setting and Prompt ‘Please set minute’, pause then prompt current

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG AB300 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AEG AB300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info