Bedienungsanleitung AEG BE 705 R (Seite 8 von 61) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

463115

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

TECHNICAL DATA Power screwdriver

 

Rated input ...........................................................

Output ...................................................................

No-load speed ......................................................

Speed under load max. ........................................

Static jamming moment ........................................

Drilling capacity in steel ........................................

Drilling capacity in aluminium ...............................

Drilling capacity in wood ......................................

Drill opening range ...............................................

Drive shank...........................................................

Weight without cable ............................................

English

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly

increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working

period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work patterns.

The dust produced when using this tool may be harmful

to health. Do not inhale the dust. Wear a suitable dust

protection mask.

The drill/screwdriver can be universally used for drilling, and

screwdriving.

Do not use this product in any other way as stated for normal

use.

We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

documents. EN 60745, EN 55014-1, EN 55014-2,

EN 61000-3-2, EN 61000-3-3, in accordance with the

regulations 2006/42/EC, 2004/108/EC

Connect only to single-phase a.c. current and only to the

system voltage indicated on the rating plate. It is also

possible to connect to sockets without an earthing contact as

the design conforms to safety class II.

WARNING!

ead all safety warnings and all instructions, including

those given in the accompanying brochure. Failure to

follow the warnings and instructions may result in electric

shock, re and/or serious injury. Save all warnings and

instructions for future reference.

Wear ear protectors. Exposure to noise can cause hearing

loss.

Hold power tool by insulated gripping surfaces when

performing an operation where the cutting tool may

contact hidden wiring or its own cord. Contact with a

“live” wire will also make exposed metal parts of the power

tool “live” and shock the operator.

Appliances used at many different locations including open

air should be connected via a residual current device of

30 mA or less.

Always wear goggles when using the machine. It is

recommended to wear gloves, sturdy non slipping shoes

and apron.

Sawdust and splinters must not be removed while the

machine is running.

Always disconnect the plug from the socket before carrying

out any work on the machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine.

Always lead the cable away behind you.

When working in walls ceiling, or oor, take care to avoid

electric cables and gas or waterpipes.

SAFETY INSTRUCTIONS

SPECIFIED CONDITIONS OF USE

EC-DECLARATION OF CONFORMITY

MAINS CONNECTION

Noise/vibration information

Measured values determined according to EN 60745.

Typically, the A-weighted noise levels of the tool are:

Sound pressure level (K = 3 dB(A))

.......................

Sound power level (K = 3 dB(A)) ...........................

Wear ear protectors!

Total vibration values (vector sum in the three axes) determined

according to EN 60745.

Drilling into metal: Vibration emission value a

......

Uncertainty K= .......................................................

Screwing: Vibration emission value a

..................

Uncertainty K= .......................................................

 BE705R

..705

...566 W

.2700 min

-1

.1820 min

-1

.....15 Nm

.....10 mm

.....16 mm

.....30 mm

. 1-10 mm

....1/2 “

....1,6 kg

..........85 dB (A)

..........96 dB (A)

..... < 2,5 m/s

.........1,5 m/s

..... < 2,5 m/s

.........1,5 m/s

Rainer Kumpf

Manager Product Development

Authorized to compile the technical file

Winnenden, 2010-02-24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AEG BE 705 R Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info