16 17
BH 24 E KH 24 E
.........................720 W ........................... 720 W
.........................360 W ........................... 360 W
.......................1500 min
-1
..................... 1500 min
-1
.......................1250 min
-1
..................... 1250 min
-1
.......................4500 min
-1
..................... 4500 min
-1
..........................2,3 J .............................. 2,3 J
..........................2,7 J .............................. 2,7 J
...........................24 mm .......................... 24 mm
...........................13 mm .......................... 13 mm
...........................30 mm .......................... 30 mm
...........................50 mm .......................... 50 mm
...........................43 mm .......................... 43 mm
..........................2,4 kg ............................ 2,4 kg
........................91,5 dB (A) ................... 91,5 dB (A)
......................102,5 dB (A) ................. 102,5 dB (A)
...........................14 m/s
2
..........................14 m/s
2
..........................1,5 m/s
2
.........................1,5 m/s
2
..............................- m/s
2
.......................1 1,6 m/s
2
..............................- m/s
2
.........................1,5 m/s
2
ENGLISH
Rated input ..............................................................................
Output ......................................................................................
No-load speed .........................................................................
Speed under load max. ...........................................................
Rate of percussion under load max. ........................................
Impact energy per stroke according to EPT A-Procedure 05/2009 .....
Impact energy per stroke (pre 2009) .......................................
Drilling capacity in concrete .....................................................
Drilling capacity in steel ...........................................................
Drilling capacity in wood ..........................................................
Light core cutter in bricks and limestone .................................
Chuck neck diameter ...............................................................
Weight according EPT A-Procedure 01/2003 ...........................
Measured values determined according to EN 60745.
T ypically , the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) .......................................
Sound power level (K = 3 dB(A)) ............................................
Wear ear protectors!
T otal vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value a
h
:
Hammer-drilling in concrete: vibration emission value a
h
.......
Uncertainty K = .......................................................................
Chiselling: vibration emission value a
h
....................................
Uncertainty K = .......................................................................
brochure. Failure to follow the warnings and instructions
SAFETY INSTRUCTIONS
Exposure to noise can cause hearing
loss.
Loss of
control can cause personal injury .
Cutting
accessory contacting a „live“ wire may make exposed metal
parts of the power tool „live“ and could give the operator an
electric shock.
Appliances used at many different locations including open
air should be connected via a residual current device of
30 mA or less.
Always wear goggles when using the machine. It is
recommended to wear gloves, sturdy non slipping shoes
and apron.
Sawdust and splinters must not be removed while the
machine is running.
Always disconnect the plug from the socket before carrying
out any work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine.
Always lead the cable away behind you.
electric cables and gas or waterpipes.
The dust produced when using this tool may be harmful to
health. Do not inhale the dust. Wear a suitable dust
protection mask.
Under the effect of extreme electromagnetic interferences
from the outside, temporary variations in the speed of
rotation could arise in particular cases.
SPECIFIED CONDITIONS OF USE
BH 24 E: The rotary pneumatic hammer can be used for
hammer drilling in stone and concrete and drilling in wood,
metal as well as plastic.
KH 24 E: The rotary pneumatic hammer can be used for
hammer drilling, chiselling in stone and concrete and drilling
in wood, metal as well as plastic.
Do not use this product in any other way as stated for
normal use.
W ARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given
in EN 60745 and may be used to compare one tool with another . It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
ENGLISH
EC-DECLARA TION OF CONFORMITY
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents.
EN 60745-1:2009 + A1 1:2010
EN 60745-2-6:2010
EN 55014-1:2006 + A1:2009 + A2:201 1
EN 55014-2:1997 + A1:2001 + A2:2008
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
in accordance with the regulations
201 1/65/EU (RoHs)
2006/42/EC
2004/108/EC
Winnenden, 2012-09-1 1
Rainer Kumpf
Director Product Development
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the
system voltage indicated on the rating plate. It is also
possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
MAINTENANCE
The ventilation slots of the machine must be kept clear at all
times.
Important note! If the carbon brushes are worn, in addition
to exchanging the brushes the tool should be sent to
after-sales service. This will ensure long service life and top
performance.
Use only AEG accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our AEG service agents
(see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at: AEG Electric T ools GmbH,
Max-Eyth-Straße 10, D-71364 Winnenden, Germany .
SYMBOLS
Please read the instructions carefully before
starting the machine.
Always disconnect the plug from the socket
before carrying out any work on the
machine.
Accessory - Not included in standard
equipment, available as an accessory .
Do not dispose of electric tools together
with household waste material! In
observance of European Directive 2002/96/
EC on waste electrical and electronic
equipment and its implementation in
accordance with national law , electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling
facility .
Class II construction, tool in which
protection against electric shock does not
rely on basic insulation only , but in which
additional safety precautions, such as
double insulation or reinforced insulation,
are provided.